Performance Data Table - Rinnai I Series Installation And Operation Manual

IMPORTANT
Unit of measurement (°F/°C, PSI/bar, and GPM/LPM) will vary depending on unit of
measure selection.
# DATA
0 1 Water Pressure
02 Water Flow Rate
03 Supply Temperature
04 Return Temperature
05 Freeze Protection Temperature
06 Exhaust Temperature
07 Outgoing Temperature
08 Inlet Temperature
1 0 Heat Exchanger Outlet Temperature
1 1 Fan Frequency
1 3 Water Flow Control Position
14 Bypass Flow Control Position
15 3-Way Valve Control Position
16 3-Way Valve Control Cycles
17 Venturi Position
18 Venturi Cycles
20 Pump Cycles
21 Pump Hours
22 Pump for Boiler
2 3 Pump for System (Pump 1)
2 4 Pump for System (Pump 2)
31 Outdoor Temperature
32 Additional Controllers Connected
40 Energization Hours
41 Combustion Hours
42 Combustion Cycles
43 Combustion Hours (DHW)
44 Combustion Cycles (DHW)
4 5 Commissioning Cycles
* Refer to the Technical Data Sheet located on the inside front cover of the boiler for additional
information.
Rinnai I-Series Condensing Boiler Combi Manual
UNIT
PSI/bar
x0.1 GPM/LPM
°F/°C
°F/°C
°F/°C
°F/°C
°F/°C
°F/°C
°F/°C
Hz
0=Mid, 1=Open, 2=Closed
Degrees of Opening
0=Mid, 1=DHW, 2=CH
x100
0=Closed, 1=Open
x100
x100
x10 Hours
0=OFF, 1=ON
0=OFF, 1=ON
0=OFF, 1=ON
°F/°C
*
x100 Hours
x10 Hours
x100
x10 Hours
x100
x1
79