Text Handling; Adding Static Text - ABB Relion Series Engineering Manual

1MRS757810 C
6.1.1.5
6.1.1.6
REC615 and RER615
Engineering Manual
The text can be presented in UniCode characters (6 x 12 pixels). The total size of the
presented white area (page) represents the visible part of the LHMI display without the
header line.
The visible display for a single-line diagram is organized in a raster of 9 x 7 (columns
x rows). Each symbol (presented in 15 x 15 pixels) included in the drag-and-drop
method must be dropped into a raster box.
The description text for an apparatus object can be placed in all four directions around
the symbol. The description is part of the apparatus object. It is possible to place the
symbols without the assistance of Snap to Grid and manually change the position
coordinates.

Text handling

The display switches when text is selected in a display of 22 x 9 (columns x rows). One
display box holds one character. A text element must be placed in the position of the
display.
The name and the unit of a measurement or text symbol can be
changed by double-clicking the symbol or via the Object Properties
view.
Selecting and toggling Show Texts using the IED fonts can be used to preview the
single-line diagram to see how it is presented in the real HMI display.

Adding static text

1. Place a Static Text object into a raster box by dragging-and-dropping.
GUID-3A78B3D9-0701-45D1-BAFB-3152B4A6689E V1 EN
Figure 65: Adding a static text field into a LHMI view
2. Edit the text in the Name field in the Object Properties view, or alternatively
double-click the text to edit it.
Section 6
LHMI engineering
95