Adding Measurands - ABB Relion Series Engineering Manual

1MRS757810 C
6.1.1.8
REC615 and RER615
Engineering Manual
GUID-F5E3E3AE-88EA-471D-B5A4-C3547D916745 V2 EN
Figure 67: Selecting input signal

Adding measurands

1. Drag a Measurand object into a raster box.
GUID-7598C96A-EDAA-4275-834C-9966FBEE5BA0 V1 EN
Figure 68: Adding a measurand object to an LHMI view
2. In the Objects Properties view, edit the name, unit and the number of decimals.
Unit text specifies the default text used for the measurement's unit. If the Unit
text is empty in the Graphical Display Editor, no unit is shown. If the Unit text
is not empty, the unit in the protection relay is updated dynamically based on the
signal it is connected to. The Scale factor parameter is not used.
Uncheck the option Place Symbol at available space in the
Graphical Display Editor menu to allocate more space for
symbols near measurands.
Section 6
LHMI engineering
97