Controlling Your Tv With The Supplied Remote - Sony DVP-F250 Operating Instructions Manual

Controlling Your TV With
the Supplied Remote
You can control the sound level, input source,
and power switch of your Sony TV with the
supplied remote.
TV
Number
buttons
You can control your TV using the buttons
below.
By pressing You can
TV [/1
Turn the TV on or off
2 (volume) +/– Adjust the volume of the TV
t (TV/video)
Switch the TV's input source
between the TV and other
input sources.
Note
Depending on the unit being connected, you may
not be able to control your TV using some of the
buttons.
Controlling other TVs with the
remote
You can control the sound level, input source,
and power switch of non-Sony TVs as well.
If your TV is listed in the table below, set the
appropriate manufacturer code.
1
While holding down TV [/1, press the
number buttons to select the
manufacturer code for your TV (see the
table below).
2
Release TV [/1.
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
one that works with your TV.
Manufacturer Code number
Sony (default) 01
Aiwa (default) 01
Grundig 11
Hitachi 24
JVC 33
LG 06
Loewe* 06
Panasonic 17, 49
Philips 06, 08
Samsung 06
Sanyo 25
Sharp 29
Thomson 43
Toshiba 38
* European models only.
Notes
• Depending on your TV, some or all buttons may
not function on the TV, even after entering the
correct manufacturer code.
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number you have set may be reset to the
default setting. Set the appropriate code number
again.
61