Additional Operations - Sony DVP-F250 Operating Instructions Manual

For Asian/Oceanian models
You can have the player turn off automatically
whenever you leave it in stop mode for more than
30 minutes. To turn on this function, set "AUTO
POWER OFF" in "CUSTOM SETUP" to "ON"
(the default setting is "OFF") (page 65).
Notes on playing DTS sound tracks on a CD
• When playing DTS-encoded CDs,
excessive noise will be heard from the
analogue stereo jacks. To avoid possible
damage to the audio system, the consumer
should take proper precautions when the
analogue stereo jacks of the player are
connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an
external 5.1-channel decoder system must
be connected to the digital jack of the
player.
• Set the sound to "STEREO" using the
(audio) button when you play DTS
sound tracks on a CD (page 49).
• Do not play DTS sound tracks without first
connecting the player to an audio
component having a built-in DTS decoder.
The player outputs the DTS signal via the
DIGITAL OUT (COAXIAL or OPTICAL)
jack even if "DTS" in "AUDIO SETUP" is
set to "OFF" in the Setup Display (page 67),
and may affect your ears or cause your
speakers to be damaged.
Notes on playing DTS sound tracks on a
DVD VIDEO
• DTS audio signals are output only through
the DIGITAL OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD VIDEO with DTS
sound tracks, set "DTS" in "AUDIO
SETUP" to "ON" (page 67).
• If you connect the player to audio
equipment without a DTS decoder, do not
set "DTS" in "AUDIO SETUP" to "ON"
(page 67). A loud noise may come out from
the speakers, affecting your ears or causing
the speakers to be damaged.
Notes
• Be sure to use an adapter (not supplied) when
playing an 8cm CD on the player positioned
upright.
• To play an 8cm DVD, do not use an adapter, and
play on the player laid flat.

Additional operations

To
Stop
Pause
Resume play after
pause
Go to the next chapter,
track, or scene in
continuous play mode
Go back to the
previous chapter,
track, or scene in
continuous play mode
Stop play and remove
the disc
Replay the previous
scene*
Briefly fast forward
the current scene**
* DVD VIDEO/DVD-RW/DVD-R only
** DVD VIDEO/DVD-RW/DVD-R/DVD+RW
only
z Hints
• The Instant Replay function is useful when you
want to review a scene or dialog that you missed.
• The Instant Search function is useful when you
want to pass over a scene that you don't want to
watch.
Note
You may not be able to use the Instant Replay or
Instant Search function with some scenes.
(instant replay)
(instant search)
Operation
Press x
Press X
Press X or H
Press >
Press .
Press Z
Press
(instant replay) during
playback
Press
(instant search) during
playback
,continued
29