Sony DVP-F250 Operating Instructions Manual page 52

L
L: Front speaker (left)
R: Front speaker (right)
: Virtual speaker
z Hint
You can also select "TVS" from the Control Menu
(page 12).
Notes
• When the playing signal does not contain a signal
for the rear speakers, the surround effects will be
difficult to hear.
• When you select one of the TVS modes, turn off
the surround setting of the connected TV or
amplifier (receiver).
• Make sure that your listening position is between
and at an equal distance from your speakers, and
that the speakers are located in similar
surroundings.
• Not all discs will respond to the "TVS NIGHT"
function in the same way.
• When you use the DIGITAL OUT (COAXIAL or
OPTICAL) jack to listen to MPEG audio signals
and set "MPEG" in "AUDIO SETUP" to
"MPEG", no sound will come from your speakers
if you select one of the TVS modes.
52
R