Connecting to an AV amplifier (receiver) with a digital input jack having
D
a Dolby Digital, MPEG audio or DTS decoder and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio, or DTS decoder function
of your AV amplifier (receiver).
D
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
OPTICAL COAXIAL
Rear (L)
to coaxial digital input
[Speakers]
Rear (R)
Subwoofer
l: Signal flow
z Hint
Use connection
when connecting to 7 or
D
more speakers (6.1 ch or more).
Note
After you have completed the connection, be sure to
set "DOLBY DIGITAL" to "DOLBY DIGITAL"
and "DTS" to "ON" in Quick Setup (page 25). If
your AV amplifier (receiver) has an MPEG audio
decoder function, set "MPEG" to "MPEG" (page
67). Otherwise, no sound or a loud noise will come
from the speakers.
CD/DVD player
DIGITAL OUT
COMPONENT VIDEO OUT
Y
C
C
PCM/DTS/MPEG/
B
R
DOLBY DIGITAL
OPTICAL COAXIAL
LINE OUT
R
L
AUDIO
VIDEO
to DIGITAL OUT
(COAXIAL or OPTICAL)
Coaxial digital cord
(not supplied)
AV amplifier (receiver) having a decoder
S VIDEO
OUT
or
Optical digital cord (not
supplied)
to optical digital input
Front (R)
[Speakers]
Front (L)
Centre
23