Table of Contents
Advertisement
Displaying the audio information
of the disc
Press DISPLAY during playback to display
the Control Menu. Select "AUDIO" using
X/x. The channels being played are displayed
on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to 5.1
channel signals can be recorded on a DVD
VIDEO. Depending on the DVD VIDEO, the
number of the recorded channels may differ.
1 2 ( 2 7 )
1 8 ( 3 4 )
T
1 : 3 2 : 5 5
1: ENGLISH
Currently playing programme format**
*"PCM," "MPEG," "DTS," or "DOLBY
DIGITAL" is displayed.
In the case of "DOLBY DIGITAL," the channels
in the playing track are displayed by numbers as
follows:
For Dolby Digital 5.1 ch:
DOLBY DIGITAL 3 / 2 . 1
Front component 2+
Centre component 1
**The letters in the programme format display
indicate the following sound components:
L:
Front (left)
R:
Front (right)
C:
Centre
LS: Rear (left)
RS: Rear (right)
S:
Rear (monaural): The rear
component of the Dolby
Surround processed signal and
the Dolby Digital signal
LFE: Low Frequency Effect signal
50
Current audio format*
DVD VIDEO
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
L
C
R
LFE
LS
RS
Rear component 2
LFE (Low Frequency
Effect) component 1
z Hint
For Dolby Digital and DTS, "LFE" is always
enclosed in a solid line regardless of the LFE signal
component being output.
Note
If "DTS" in "AUDIO SETUP" is set to "OFF," the
DTS track selection option will not appear on the
screen even if the disc contains DTS tracks (page
67).
Advertisement
Table of Contents
