Sony DVP-F25 Service Manual
Hide thumbs Also See for DVP-F25:
Table of Contents

Advertisement

Quick Links

SERVICE MANUAL
System
Laser: Semiconductor laser
Signal format system:
PAL/NTSC
(except US/Canadian
model)
:
NTSC (US/Canadian
model)
Audio characteristics
Frequency response: DVD VIDEO (PCM
96 kHz): 2 Hz to 44 kHz (±1.0 dB)/DVD
VIDEO (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)/CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio (S/N ratio): 115 dB
(AUDIO OUT L/R jacks only)
Harmonic distortion: 0.003 %
Dynamic range: DVD VIDEO: 103 dB/CD:
99 dB
Wow and flutter: Less than detected value
(±0.001% W PEAK)
When you play PCM sound tracks with a
96 kHz sampling frequency, the output
signals from the DIGITAL OUT (OPTICAL)
jack are converted to 48 kHz sampling
frequency.
All manuals and user guides at all-guides.com
Photo : DVP-F25
RMT-D151E
SPECIFICATIONS
Outputs
(Jack name: Jack type/Output level/Load
impedance)
AUDIO OUT L/R: Phono jack/2 Vrms/
10 kilohms
DIGITAL OUT (OPTICAL): Optical
output jack/-18 dBm (wave length:
660 nm)
COMPONENT VIDEO OUT (Y, C
Phono jack/Y: 1.0 Vp-p/C
0.7 Vp-p/75 ohms
VIDEO OUT: Phono jack/1.0 Vp-p/75 ohms
S VIDEO OUT: 4-pin mini DIN/
Y: 1.0 Vp-p/C: 0.3 Vp-p (PAL),
0.286 Vp-p (NTSC)/75 ohms
DVP-F25
RMT-D151A/D151E
Canadian Model
Argentina Model
Hong Kong Model
Singapore Model
Australian Model
New Zealand Model
General
Power requirements:
US,Canadian,Mexico model:
120V AC, 60 Hz
Other country model:
2
20 to 240 V AC, 50/60 Hz
Power consumption: 9 W
Dimensions (approx.): 196 × 61 × 265 mm
× 2
3
1
, C
):
(7
/
/
B
R
4
2
, C
:
(wid
th/height/depth) incl. projecting
B
R
parts
Mass (approx.): 1.8 kg (3 lb 14 oz.)
Operating temperature: 5 ° C to 35 ° C
(41 °F to 95 °F)
Operating humidity: 25 % to 80 %
Supplied accessories
See page 1-3.
Specifications and design are subject to
change without notice.
CD/DVD PLAYER
US Model
AEP Model
UK Model
Mexico Model
× 10
1
/
in.)
2

Advertisement

Table of Contents
loading

Summary of Contents for Sony DVP-F25

  • Page 1 Canadian Model AEP Model UK Model Argentina Model Mexico Model Hong Kong Model Singapore Model Australian Model New Zealand Model Photo : DVP-F25 RMT-D151E SPECIFICATIONS System Outputs General Laser: Semiconductor laser (Jack name: Jack type/Output level/Load Power requirements: Signal format system:...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3: Table Of Contents

    All manuals and user guides at all-guides.com TABLE OF CONTENTS GENERAL 2-3. CONTROL PANEL ASSEMBLY ··································· 2-2 2-4. COVER ············································································ 2-2 Precautions ············································································· 1-1 2-5. SW-377 BOARD, IF-96 BOARD ··································· 2-3 About this Manual ································································· 1-1 2-6. MECHANISM DECK ····················································· 2-3 This Player Can Play the Following Discs ····························...
  • Page 4 All manuals and user guides at all-guides.com • POWER BLOCK (ZSSR216GA/ZSSR216HA) PRINTED WIRING BOARD ······················· 4-35 • POWER BLOCK (ZSSR216GA/ZSSR216HA) SCHEMATIC DIAGRAM ···························· 4-37 • IR-42 (IR), SW-377 (FUNCTION KEY), IF-96 (FRONT KEY) PRINTED WIRING BOARDS ····················· 4-39 IC PIN FUNCTION DESCRIPTION 5-1.
  • Page 5: General

    –video CD format concerning your player, please consult your –MP3 format that conforms to ISO9660* nearest Sony dealer. * MP3 (MPEG1 Audio Layer 3) is a standard Level 1/Level 2, or its extended format, format defined by ISO (International Standard...
  • Page 6: Notes About The Discs

    All manuals and user guides at all-guides.com Note that discs created in the Packet Write format evenly along the edge before inserting the cannot be played. Index to Parts and Controls disc into the player. Be sure not to touch the playback side of the disc when wiping the Note on playback operations of edge.
  • Page 7: Guide To On-Screen Displays (Control Bar)

    All manuals and user guides at all-guides.com NDisplay 2 NDisplay 3 The following play modes 7~qs can be set. Guide to On-Screen Shows the same information as Display 2 NNo display The indicator lights up in blue when activated. during playback. Displays (Control Bar) Example: When “TVS”...
  • Page 8: Step 4: Playing A Disc

    All manuals and user guides at all-guides.com Step 4: Playing a Disc Hookups Hooking Up the Player Follow Steps 1 to 5 to hook up and adjust the settings of the player. Before you start, disconnect the power cords, check that you have all of the supplied accessories, and insert the batteries into the remote (page 14).
  • Page 9: Step 2: Connecting The Audio Cords

    All manuals and user guides at all-guides.com Notes Step 2: Connecting the Audio Cords • Connect the player directly to the TV. If you pass the player signals via the VCR, etc., you may not receive a clear image on the TV screen. Refer to the chart below to select the connection that best suits your system.
  • Page 10: Step 3: Attaching The Jack Cover And Stand

    • Sony will refrain from any responsibility on the Notes accident or damage caused by improper •...
  • Page 11: Step 4: Connecting The Power Cord

    All manuals and user guides at all-guides.com Press X/x to select the setting that AUDIO SETUP Step 4: Connecting the Power Cord AUDIO ATT: matches your TV type. AUDIO DRC: STANDARD DOWNMIX: DOLBY SURROUND N If you have a wide-screen TV or a 4:3 DIGITAL OUT: Plug the player and TV mains leads (power cord) into a mains.
  • Page 12: Searching For A Particular Point On A Disc

    Notes • When you insert an 8-cm (3-inch) disc, insert the disc slowly at the centre of the disc slot. If you cannot eject the disc, consult your nearest Sony When the player is in standby mode, press dealer. O RETURN, ENTER, and then [/1 on the •...
  • Page 13: Playing Video Cds With Pbc Functions (Pbc Playback)

    All manuals and user guides at all-guides.com z Hint Selecting an album and track To play without using PBC, press ./> while Playing VIDEO CDs with Playing an MP3 Audio the player is stopped to select a track, then press H PBC Functions Track or ENTER.
  • Page 14 All manuals and user guides at all-guides.com Press C/c to select change using X/x or the number buttons, Playing in random order (Shuffle and press c. PROGRAM (PROGRAM), then press ENTER. Play) ALL CLEAR Follow Step 5 for new programming. To 1.
  • Page 15: Searching For A Scene

    All manuals and user guides at all-guides.com N When playing a DVD To return to normal play (TITLE) Press CLEAR. (CHAPTER) Searching for a Scene To turn off the Control Bar (TIME/TEXT) (NUMBER INPUT) Press DISPLAY repeatedly until the Control Searching for a Title/ Select “TIME/TEXT”...
  • Page 16: Sound Adjustments

    DTS), you can change the audio or more times, the DVD is recorded in Rear (L/R) TVS was developed by Sony to produce format. If the DVD is recorded with multiple audio formats. surround sound for home use using just a...
  • Page 17: Adjusting The Picture Quality (Bnr)

    All manuals and user guides at all-guides.com To turn off the subtitles To cancel the “BNR” setting Adjusting the Picture Adjusting the Playback Select “OFF” in Step 2. Select “OFF” in Step 2. Quality Picture To turn off the Control Bar (BNR) (CUSTOM PICTURE MODE) Note...
  • Page 18: Using Various Additional Functions

    All manuals and user guides at all-guides.com Enter or re-enter your 4-digit password Parental Control (limited Using Various Additional QUICK using the number buttons, then press playback) Functions ENTER. “Custom parental control is set.” appears Playback of some DVDs can be limited Locking Discs when you enter your password.
  • Page 19: Controlling Your Tv With The Supplied Remote

    Code number If you make a mistake You can control the sound level, input source, Press O RETURN. and power switch of your TV with the Sony (default) supplied remote. Set the appropriate Grundig To turn off the display manufacturer’s code.
  • Page 20: Settings For The Display (Screen Setup)

    All manuals and user guides at all-guides.com N SCREEN SAVER Settings for the Display Custom Settings The screen saver image appears when you 16:9 (CUSTOM leave the player in pause or stop mode for 15 (SCREEN SETUP) SETUP) minutes, or when you play back a CD or DATA CD (MP3 audio) for more than 15 minutes.
  • Page 21: Additional Information

    , The player cannot play audio tracks in , The DVD prohibits changing of the , Contact your nearest MP3PRO format. Sony dealer or local subtitles. authorized Sony service facility and give the 5- The title of the MP3 audio album or track The angles cannot be changed.
  • Page 22: Glossary

    All manuals and user guides at all-guides.com GB, a single-layer and double-sided DVD is Glossary Language Code List 9.4 GB, and double-layer and double-sided DVD is 17 GB. The picture data uses the MPEG 2 format, one Chapter (page 45) For details, see pages 48, 51, 63.
  • Page 23: Disassembly

    All manuals and user guides at all-guides.com DVP-F25 SECTION 2 DISASSEMBLY The following flow chart shows the disassembly procedure. Upper case assembly (Page 2-2) Lower case (Page 2-2) Control panel assembly (Page 2-2) SW-377 board, IF-96 board Cover (Page 2-3)
  • Page 24: Upper Case Assembly

    All manuals and user guides at all-guides.com NOTE: Follow the disassembly procedure in the numerical order given. 2-1. UPPER CASE ASSEMBLY 2-3. CONTROL PANEL ASSEMBLY 4 Remove the upper case assembly in the direction of the arrow. 3 Six claws 3 Three claws 2 Claw 1 Claw...
  • Page 25: Board, If-96 Board

    All manuals and user guides at all-guides.com 2-5. SW-377 BOARD, IF-96 BOARD 2-7. CHUCKING ARM BLOCK 2 While opening claw in the direction of the arrow, and remove the chucking arm assembly. 7 Groove 6 Claw 9 IF-96 board 1 Tension spring 5 Screw (B3)
  • Page 26: Base (C) Assembly

    All manuals and user guides at all-guides.com 2-9. BASE (C) ASSEMBLY 2-11.BU HOLDER, RACK (L) 5 Screw (PWH 2.6) 1 Screw (PWH 2.6) 4 Two screws 2 Flexible 3 Two screws board 2 Spring (slider) (CN103) 3 Screw (PWH 2.6) 1 Flexible 5 Base (C) assembly board...
  • Page 27: Roller (Slider)

    All manuals and user guides at all-guides.com 2-13.ROLLER (SLIDER) 2-15.IR-42 BOARD 5 Light guide cover 1 Four stopper washers 2 Screw (B3) 6 IR-42 board 2 Four rollers (slider) 3 Two dowels 4 Claw 1 Flexible board (CN1651) 2-14.SLIDER (L), SLIDER (R) 2-16.POWER BLOCK 1 Move the slider (R) in the direction 2 Remove the power block...
  • Page 28: Board

    All manuals and user guides at all-guides.com 2-17.MB-106 BOARD 2-19.SLIDERS (L) AND (R) PHASE ADJUSTMENT 6 MB-106 board When installing the gear (P), the phase 1 Flexible board 5 Five screws adjustment between sliders (L) and (R) (CN604) (B3) is performed in the following position. 2 Flexible board (CN1651)
  • Page 29 All manuals and user guides at all-guides.com 2-20.INTERNAL VIEWS Optical pick-up (KHM-270AAA)(SERVICE) A-6062-709-A Base (C) assy X-3951-911-1 Optical pick-up (KHM-270AAA)(SERVICE) A-6062-709-A...
  • Page 30: Circuit Boards Location

    All manuals and user guides at all-guides.com 2-21.CIRCUIT BOARDS LOCATION IR-42 MD-90M (IR) (MODE SWITCH) AV-68 (AUDIO/VIDEO OUT) POWER BLOCK (SWITCHING REGULATOR) MD-89M IF-96 (MODE SWITCH) (FRONT KEY) MD-91M (MODE SWITCH) MB-106 DVD/CD RF AMP, DIGITAL SERVO, MOTOR DRIVE, SW-377 SERVO, AV DECODER, SD RAM, SYSTEM CONTROL, (FUNCTION KEY) AUDIO DAC, PLL, POWER, INTERFACE CONTROL...
  • Page 31: Block Diagrams

    All manuals and user guides at all-guides.com DVP-F25 SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM AV-68 BOARD MB-106 BOARD (SEE PAGE 4-29) (SEE PAGE 4-11 to 4-26) (CEK, EC2, SP, HK) IC404 IC405 16M SDRAM 16M SDRAM J602 S VIDEO OUT...
  • Page 32: Rf/Servo Block Diagram

    All manuals and user guides at all-guides.com DVP-F25 3-2. RF/SERVO BLOCK DIAGRAM IC201 2 (CD PB) IC201 2 (DVD PB) IC201 rs IC201 rs (DVD PLAY) (CD PLAY) 180mVp-p 770mVp-p 20ms/div 450mVp-p 20ms/div 330mVp-p 0.2usec/div 40msec/div BASE UNIT KHM-270AAA MB-106 BOARD (1/5)
  • Page 33: Signal Processor Block Diagram

    All manuals and user guides at all-guides.com DVP-F25 3-3. SIGNAL PROCESSOR BLOCK DIAGRAM MB-106 BOARD (2/5) (SEE PAGE 4-15 to 4-20) IC405 IC404 16M SDRAM 16M SDRAM IC303 16M DRAM ADDT 0 – 15 ADAD 0 – 11 135-138 140-143...
  • Page 34: System Control Block Diagram

    All manuals and user guides at all-guides.com DVP-F25 3-4. SYSTEM CONTROL BLOCK DIAGRAM MD-89 BOARD (2/2) MB-106 BOARD (3/5) (SEE PAGE 4-34) (SEE PAGE 4-21) IC106 IC107 S102 FLASH MD-90 BOARD CN201 (2/2) S103 (SEE PAGE 4-33) ROSW2 ROSW3 ROSW4 HA 0 –...
  • Page 35: Video Block Diagram

    All manuals and user guides at all-guides.com DVP-F25 3-5. VIDEO BLOCK DIAGRAM AV-68 BOARD (1/2) (SEE PAGE 4-29) J601 (2/2) LINE VIDEO IC606 ed IC606 VIDEO BUFFER 2.5Vp-p CN604 (1/2) VIDEO VIDEO IN VIDEO OUT IC606 wl 2.0Vp-p J602 S/Y-OUT...
  • Page 36: Audio Block Diagram

    All manuals and user guides at all-guides.com DVP-F25 3-6. AUDIO BLOCK DIAGRAM AV-68 BOARD (2/2) (SEE PAGE 4-29) MB-106 BOARD (4/5) IC604 (SEE PAGE 4-25) CN604 (3/4) CN604 (2/2) SPDIF1 1 D IN OPTICAL INTERFACE SIRCS CONTROL S-LINK J603 SPDIF1...
  • Page 37: Interface Control Block Diagram

    All manuals and user guides at all-guides.com DVP-F25 3-7. INTERFACE CONTROL BLOCK DIAGRAM IF-96 BOARD MB-106 BOARD (5/5) IC101 (SEE PAGE 4-23) IC704 (1/2) REMOTE COMMANDER RECEIVER (FRONT) BUFFER CN702 CN101 FRONTIR FRONTIR /IR2 EVER+5V D103 LED11/STBY LED11 STBY LED12/PWR...
  • Page 38: Power Block Diagram (1/2)

    All manuals and user guides at all-guides.com DVP-F25 3-8. POWER BLOCK DIAGRAM (1/2) SWITCHING REGULATOR (ZSSR216GA/HA) (SEE PAGE 4-37) T101 Q203 CN201 IP201 L203 POWER SW+11V (AU) TRANSFORMER Q201 L202 D201 SW+11V (M) • Q303 D301 IP301 L303 SW+5V D303...
  • Page 39: Power Block Diagram (2/2)

    All manuals and user guides at all-guides.com DVP-F25 3-9. POWER BLOCK DIAGRAM (2/2) AV-68 BOARD (SEE PAGE 4-29) CN604 5V (D-OUT) AI+5V IC605 –5V REG IC606 VIDEO SW–8V BUFFER AU+11V IC603 AUDIO AMP SW–8V CN603 IC604 OPTICAL DIGITAL DIGITAL OPTICAL...
  • Page 40 All manuals and user guides at all-guides.com MEMO 3-20E...
  • Page 41: Printed Wiring Boards And Schematic Diagrams

    All manuals and user guides at all-guides.com DVP-F25 SECTION 4 PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS 4-1. FRAME SCHEMATIC DIAGRAM CN703 CN203 CN201 EVER+5V EVER+5V BASE UNIT SW-377 SW4 STOP/PAUSE SW4 STOP/PAUSE FMS-21 BOARD SW2 EJECT/PLAY SW2 EJECT/PLAY FLAT CABLE...
  • Page 42: Printed Wiring Board

    All manuals and user guides at all-guides.com DVP-F25 4-2. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS THIS NOTE IS COMMON FOR WIRING BOARDS AND SCHEMATIC DIAGRAMS (In addition to this, the necessary note is printed in each block) (For printed wiring boards) (For schematic diagrams) •...
  • Page 43 All manuals and user guides at all-guides.com DVP-F25 MB-106 AV-68 BOARD BOARD IR-42 MD-90M (IR) (MODE SWITCH) IC103 8 IC201 rs IC403 tj IC606 ed AV-68 (AUDIO/VIDEO OUT) POWER BLOCK (CD PLAY) (SWITCHING REGULATOR) 930mVp-p 3.9Vp-p 37nsec 20ms/div 330mVp-p 2.5Vp-p...
  • Page 44 All manuals and user guides at all-guides.com DVP-F25 For printed wiring board MB-106 (DVD/CD, RF AMP, DIGITAL SERVO, MOTOR DRIVE, SERVO, AV DECODER, SD RAM, SYSTEM CONTROL, There are a few cases that the part printed on • : Uses unleaded solder.
  • Page 45 All manuals and user guides at all-guides.com DVP-F25 • : Uses unleaded solder. • Refer to page 4-6 for circuit boards location. MB-106 BOARD (SIDE B) D603 IC101 IC103 IC106 IC201 IC202 IC203 IC303 IC401 IC402 IC601 IC602 IC701 Q201...
  • Page 46: Dvd/Cd Rf Amp, Digital Servo

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. • Refer to page 4-5 for waveforms. MB-106 BOARD(1/8) CN202 DVD/CD RF AMP,DIGITAL SERVO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE...
  • Page 47: Motor Drive

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. MB-106 BOARD(2/8) MOTOR DRIVE -REF.NO.:1000 SERIES- XX MARK:NO MOUNT +11V NO MARK:PB MODE M_GND +3.3V TO(8/8) R259 JL248 JL247 EVER+5V...
  • Page 48: Servo

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. • Refer to page 4-5 for waveforms. MB-106 BOARD(3/8) SERVO -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE FL302 R351 +1.8V...
  • Page 49: Av Decoder

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. • Refer to page 4-5 for waveforms. MB-106 BOARD(4/8) AV DECODER -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE XWRH...
  • Page 50: Sdram

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. MB-106 BOARD(5/8) NO MARK:PB MODE SDRAM -REF.NO.:1000 SERIES- XX MARK:NO MOUNT ADDT0 ADDT0 IC404 MSM56V16160F-10T4FM1 ADDT15 C437 ADDT15 ADDT1 ADDT1...
  • Page 51: System Control

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. • Refer to page 4-5 for waveform. MB-106 BOARD(6/8) SYSTEM CONTROL -REF.NO.:1000 SERIES- XX MARK:NO MOUNT NO MARK:PB MODE +3.3V TO(8/8) +1.8V...
  • Page 52 All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board of MB-106 board. • Refer to page 4-39 for printed wiring board of IR-42, SW-377, IF-96 boards. • Refer to page 4-5 for waveform.
  • Page 53: Power, Audio Adc, Pll

    All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-7 for printed wiring board. • Refer to page 4-5 for waveforms. IC103 MB-106 BOARD(8/8) 27MAVD POWER,AUDIO DAC,PLL FB101 R176 -REF.NO.:1000 SERIES- C104 IC103 SM8707EV-G-E2 C112 0.01u...
  • Page 54: Av Out) Printed Wiring Board

    All manuals and user guides at all-guides.com DVP-F25 AV-68 (AV OUT) PRINTED WIRING BOARD • : Uses unleaded solder. For printed wiring board AV-68 BOARD IR-42 MD-90M (IR) (MODE SWITCH) CN603 B-1 There are a few cases that the part printed on...
  • Page 55 All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-27 for printed wiring board. • Refer to page 4-5 for waveforms. AV-68 BOARD R616 A/V OUT 4700 R626 ± 0.5% 2200 -REF.NO.:2000 SERIES- R628...
  • Page 56: Function Switch 1), Md-90 (Function Switch), Md-91 (Switch) Printed Wiring Boards

    All manuals and user guides at all-guides.com DVP-F25 MD-89 (FUNCTION SWITCH 1), MD-90 (FUNCTION SWITCH), MD-91 (SWITCH) PRINTED WIRING BOARDS MD-89 BOARD (SIDE A) MD-91 BOARD (SIDE A) S104 CN104 S102 S103 R101 1-682-758- (11) CN103 1-682-760- (11) MD-90 BOARD (SIDE A)
  • Page 57 All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-31 for printed wiring board. MD-89 BOARD MD-91 BOARD S102 TP102 S401 R103 S103 TP103 CN401 R102 S104 FDD-13 ROSW1 TP104 FLAT CABLE CN402 R101...
  • Page 58: Power Block (Zssr216Ga/Zssr216Ha) Printed Wiring Board

    All manuals and user guides at all-guides.com DVP-F25 POWER BLOCK (ZSSR216GA/ZSSR216HA) PRINTED WIRING BOARD • : Uses unleaded solder. SWITCHING REG (ZSSR216GA: US,Canadian,Mexico Model) (ZSSR216HA: Other Country Model) 1-468-701- 1-468-702- 11 For printed wiring board There are a few cases that the part printed on this diagram isn’t mounted in this model.
  • Page 59 All manuals and user guides at all-guides.com DVP-F25 For Schematic Diagram • Refer to page 4-35 for printed wiring board. POWER BLOCK ZSSR216GA(US,Canadian,Mexico Model) IP201 500mA L203 C201 ZSSR216HA(Other Country Model) 1000p 630V R206 Q203 L201 T101 100k CPH3314 F101...
  • Page 60: Ir), Sw-377 (Function Key), If-96 (Front Key) Printed Wiring Boards

    All manuals and user guides at all-guides.com DVP-F25 IR-42 (IR), SW-377 (FUNCTION KEY), IF-96 (FRONT KEY) PRINTED WIRING BOARDS • : Uses unleaded solder. • Refer to page 4-24 for schematic diagrams. (IR-42 BOARD only) For printed wiring board There are a few cases that the part printed on this diagram isn’t mounted in this model.
  • Page 61: Ic Pin Function Description

    All manuals and user guides at all-guides.com DVP-F25 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. SYSTEM CONTROL PIN FUNCTION (MB-106 BOARD IC104: MB91307RPFV-G-BND-E1) Pin No. Pin Name Function HA17-HA21 Address bus A17 to A21 HA22 – Not used I2C EEPROM write protect output XSACS –...
  • Page 62 All manuals and user guides at all-guides.com Pin No. Pin Name Function – Power supply (+3.3 V) CKSW3 Chuck sensor input3 CKSW1 Tray sensor input1 CS0X Chip select signal output (for external ROM) CS1X – Not used CS2X AV DEC chip select signal output CS3X AV DEC chip select signal output CS4X...
  • Page 63: Test Mode

    All manuals and user guides at all-guides.com DVP-F25 SECTION 6 TEST MODE 6-1. GENERAL DESCRIPTION 6-3. SYSCON DIAGNOSIS The Test Mode allows you to make diagnosis and adjustment eas- The same contents as board detail check by serial interface can be ily using the remote commander and monitor TV.
  • Page 64 All manuals and user guides at all-guides.com To quit the diagnosis and return to the Check Menu screen, press General Description of Checking Method x or [ENTER] key. If an error occurred, the diagnosis is suspended 2. Version and the error code is displayed as shown below. (2-2) Revision ROM revision number is displayed.
  • Page 65 All manuals and user guides at all-guides.com 4. Servo (5-4) ARP to RAM Address Bus Data write t other address read discord check (4-2) Servo DSP Check Error 10: ARP Tt RAM address bus error Data write t read, and accord check Caution: Address and data display in case of an error is Error 12: Read data discord different from the display of other diagnosis (described...
  • Page 66 All manuals and user guides at all-guides.com 6. AV Decoder 8. Audio Output (8-2) ARP t1935 (6-2) 1935 RAM Data flow from supply system DRAM to SDRAM of AV Data write t read, and accord check Decoder is tested. Error 14: AVD RAM read data discord Error 15: ARP t 1935 video NG The program code data stored in ROM (IC107) are copied 16: ARP t 1935 audio NG...
  • Page 67: Drive Auto Adjustment

    All manuals and user guides at all-guides.com Error Codes List 6-4. DRIVE AUTO ADJUSTMENT 00: Error not detected DVD reference disc 01: RAM write/read data discord Single Layer 02: GATE array NG HLX-503 (J-6090-069-A) (NTSC) OR 03: EEPROM NG HLX-504 (J-6090-088-A) (NTSC) 04: Flash memory clear error Dual Layer 05: Flash memory write error...
  • Page 68 All manuals and user guides at all-guides.com 1. DVD Single Layer Disc 3. DVD Dual Layer Disc Select [1], insert DVD single layer disc, and press [ENTER] key, Select [3], insert DVD dual layer disc, and press [ENTER] key, and and the adjustment will be made through the following steps, then the adjustment will be made through the following steps, then ad- adjusted values will be written to the EEPROM.
  • Page 69: Drive Manual Operation

    All manuals and user guides at all-guides.com 0. Disc Check Memory 6-5. DRIVE MANUAL OPERATION On the Test Mode Menu screen, select [2], and the manual opera- Disc Check tion menu will be displayed. For the manual operation, each servo on/off control and adjustment can be executed manually.
  • Page 70 All manuals and user guides at all-guides.com 2. Servo Control Once the disc type has been selected, the sector address or time code display field will appear as shown below. These values are displayed when PLL is locked. Servo Control 1.
  • Page 71 All manuals and user guides at all-guides.com 3. Track/Layer Jump 4. Manual Adjustment Track/Layer Jump Manual Adjustment:Up/Down 1. 1Tj FWD R. Fj (L1->L0) 1. TRK. Offset 2. 1Tj REV L. Fj (L0->L1) 2. Focus Gain 3. 2Tj FWD U. Lj (L1->L0) 3.
  • Page 72 All manuals and user guides at all-guides.com 5. Auto Adjustment 6. Memory Check The display image is shown below and three screens in total can Auto Adjustment be selected. 1. Auto TRK. Offset  DL  2. Auto Focus Balance EEPROM DATA 1 3.
  • Page 73: Mecha Aging

    All manuals and user guides at all-guides.com 6-6. MECHA AGING 6-8. VERSION INFORMATION ### Version Infomation ### ### Mecha Aging ### IF con. Ver.x.xxx(xxxx) Group SYScon. Ver.x.xxx(xxxx) Press OPEN key Model Region 0x Servo DSP Ver:x.xxx AVD ucode Ver:xxxxxxxx Abort : STOP key OPT TYPE : x LASER Exit : RETURN On the Test Mode Menu screen, selecting [3] executes the aging...
  • Page 74: If Con Self Diagnostic Function

    All manuals and user guides at all-guides.com 6-10. IF CON SELF DIAGNOSTIC FUNCTION You can check functions of the buttons using the self- diagnostics function of IFcon as follows. The self-diagnostics mode of IFcon is different from the normal operation in the following points. 1.
  • Page 75: Electrical Adjustment

    All manuals and user guides at all-guides.com DVP-F25 SECTION 7 ELECTRICAL ADJUSTMENT In making adjustment, refer to 7-3. Adjustment Related 7-1. POWER SUPPLY CHECK Parts Arrangement. ZSSR216GA (US,Canadian,Mexico) ZSSR216HA (Except: US,Canadian,Mexico) This section describes procedures and instructions necessary for adjusting electrical circuits in this unit.
  • Page 76: Adjustment Of Video System

    All manuals and user guides at all-guides.com Checking S Video Output S-C 7-2. ADJUSTMENT OF VIDEO SYSTEM <Purpose> Video Level Adjustment (MB-106 BOARD) This checks whether the S video output S-C satisfies the NTSC <Purpose> standard. If it is not correct, the colors will be too dark or too light. This adjustment is made to satisfy the NTSC standard, and if not Mode Video level adjustment in test mode...
  • Page 77 All manuals and user guides at all-guides.com Checking Component Video Output B-Y Checking Component Video Output R-Y <Purpose> <Purpose> This checks component video output B-Y. If it is incorrect, correct This checks component video output R-Y. If it is incorrect, correct color will not be displayed when connected to, for instance, color will not be displayed when connected to, for instance, component input projector.
  • Page 78: Adjustment Related Parts Arrangement

    All manuals and user guides at all-guides.com 7-3. ADJUSTMENT RELATED PARTS ARRANGEMENT MB-106 BOARD (Side A) CN501 RV402 POWER BOARD (Side A) CN201 7-4E...
  • Page 79: Repair Parts List

    All manuals and user guides at all-guides.com DVP-F25 SECTION 8 REPAIR PARTS LIST 8-1. EXPLODED VIEWS NOTE: • -XX, -X mean standardized parts, so they may • Abbreviation The components identified by mark 0or have some differences from the original one.
  • Page 80: Overall Section

    All manuals and user guides at all-guides.com 8-1-1. OVERALL SECTION Mechanism deck section-1, 2 (See page 8-3, 8-4) supplied supplied Main chassis section supplied (See page 8-5) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-077-373-21 CASE, LOWER (US,CND) X-3952-790-1 COVER (LOWER) ASSY, TERMINAL 3-077-373-31 CASE, LOWER (AEP,UK,AUS,NZ,HK,SP) 3-070-489-01 LABEL, PATCH...
  • Page 81: Mechanism Deck Section-1

    All manuals and user guides at all-guides.com 8-1-2. MECHANISM DECK SECTION-1 supplied supplied Mechanism deck section-2 (See page 8-4) supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 7-627-554-58 SCREW +P 2X2.8 3-070-596-01 SPRING, COMPRESSION X-3951-914-1 MOTOR (C) ASSY 3-070-587-01 SPRING, EXTENSION 3-070-576-01 BRACKET (C), MOTOR...
  • Page 82: Mechanism Deck Section-2

    All manuals and user guides at all-guides.com 8-1-3. MECHANISM DECK SECTION-2 supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-070-554-01 GEAR (P) 3-727-176-01 WASHER, STOPPER X-3952-705-1 SLIDER (L) ASSY 3-070-567-01 GEAR (R) 3-968-729-81 SCREW (2X3) 3-070-566-01 WHEEL (R), WORM 7-685-104-19 SCREW +P 2X6 TYPE2 NON-SLIT 3-070-569-01 ROLLER (SLIDER)
  • Page 83: Main Chassis Section

    All manuals and user guides at all-guides.com 8-1-4. MAIN CHASSIS SECTION supplied supplied supplied not supplied not supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-970-608-01 SUMITITE (B3), +BV A-6065-807-A MB-106(EC) BOARD, COMPLETE 0 152 1-468-701-11 POWER BLOCK (ZSSR216GA)(MX,US,CND) (AEP,UK,AUS,NZ) 0 152...
  • Page 84: Electrical Parts List

    All manuals and user guides at all-guides.com AV-68 8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • SEMICONDUCTORS When indicating parts by reference number, parts list may be different from the parts In each case, u: µ, for example: please include the board name.
  • Page 85 All manuals and user guides at all-guides.com AV-68 IF-96 IR-42 MB-106 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R622 1-218-865-11 METAL CHIP 5.6K 0.5% 1/10W IR-42(UC) COMPL R623 1-216-825-11 METAL CHIP 2.2K 1/16W *************** R626 1-216-825-11 METAL CHIP 2.2K 1/16W...
  • Page 86 All manuals and user guides at all-guides.com MB-106 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C216 1-164-230-11 CERAMIC CHIP 220PF C308 1-126-206-11 ELECT CHIP 100uF 6.3V C218 1-162-965-11 CERAMIC CHIP 0.0015uF 10% C309 1-162-970-11 CERAMIC CHIP 0.01uF C219 1-107-826-11 CERAMIC CHIP...
  • Page 87 All manuals and user guides at all-guides.com MB-106 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C429 1-162-970-11 CERAMIC CHIP 0.01uF CN703 1-779-353-21 CONNECTOR, FFC/FPC 5P C431 1-162-970-11 CERAMIC CHIP 0.01uF C432 1-162-970-11 CERAMIC CHIP 0.01uF <...
  • Page 88 All manuals and user guides at all-guides.com MB-106 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < COIL > R141 1-216-833-11 METAL CHIP 1/16W R143 1-216-864-11 METAL CHIP 1/16W L201 1-412-031-11 INDUCTOR CHIP 47uH R145 1-216-864-11 METAL CHIP 1/16W L202 1-412-031-11 INDUCTOR CHIP 47uH...
  • Page 89 All manuals and user guides at all-guides.com MB-106 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R226 1-216-853-11 METAL CHIP 470K 1/16W R315 1-216-817-11 METAL CHIP 1/16W R227 1-216-846-11 METAL CHIP 120K 1/16W R316 1-216-829-11 METAL CHIP 4.7K 1/16W R229...
  • Page 90 All manuals and user guides at all-guides.com MB-106 MD-89M MD-90M MD-91M POWER BLOCK (ZSSR216GA/ZSSR216HA) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R638 1-216-841-11 METAL CHIP 1/16W MD-89M COMPL (AEP,UK,AUS,NZ) ************** R639 1-216-833-11 METAL CHIP 1/16W R640 1-216-841-11 METAL CHIP 1/16W...
  • Page 91 All manuals and user guides at all-guides.com SW-377 Ref. No. Part No. Description Remarks A-6065-802-A SW-377 BOARD, COMPLETE *********************** < CONNECTOR > * CN201 1-793-155-11 CONNECTOR, FFC/FPC 5P < RESISTOR > R202 1-216-073-91 RES-CHIP 1/10W R204 1-216-073-91 RES-CHIP 1/10W < SWITCH > S201 1-771-206-11 SWITCH, KEY BOARD (LED NON) (EJECT) S202...
  • Page 92 All manuals and user guides at all-guides.com DVP-F25 Sony Corporation 2002H1600-1 Home Video Company 9-929-734-11 ©2002.8 — 122 — Published by Quality Assurance Dept.

This manual is also suitable for:

Rmt-d151aRmt-d151e

Table of Contents