Settings For The Display (Screen Setup) - Sony DVP-F250 Operating Instructions Manual

Settings for the Display
(SCREEN SETUP)
Choose settings according to the TV to be
connected.
Select "SCREEN SETUP" in the Setup
Display. To use the display, see "Using the
Setup Display" (page 62).
The default settings are underlined.
Example: Asian/Oceanian models
SCREEN SETUP
TV TYPE:
COLOR SYSTEM:
SCREEN SAVER:
BACKGROUND:
TV TYPE
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
16:9
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
4:3 Select this when you connect a
LETTER
4:3 screen TV. Displays a wide
BOX
picture with bands on the upper
and lower portions of the
screen.
4:3
Select this when you connect a
PAN SCAN
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
64
Depending on the DVD, "4:3 LETTER BOX" may
be selected automatically instead of "4:3 PAN
SCAN" or vice versa.
(Asian/Oceanian models only)
Selects the colour system when you play a
VIDEO CD.
AUTO
PAL
16:9
AUTO
ON
JACKET PICTURE
NTSC
• You cannot change the colour system for DVDs.
• You can change the colour system of this player
The screen saver image appears when you leave
the player in pause or stop mode for 15 minutes,
or when you play back a CD or DATA CD
(MP3 audio) for more than 15 minutes. The
screen saver will help prevent your display
device from becoming damaged (ghosting).
Press H to turn off the screen saver.
ON
OFF
Note
COLOR SYSTEM (VIDEO CD only)
Outputs the video signal in the
system of the VIDEO CD, either
PAL or NTSC. If your TV is the
DUAL system, select AUTO.
Changes the video signal of an
NTSC VIDEO CD and outputs
it in the PAL system.
Changes the video signal of a
PAL VIDEO CD and outputs it
in the NTSC system.
Notes
according to the connected TV (page 16).
SCREEN SAVER
Turns on the screen saver.
Turns off the screen saver.