Presetting Stations; Preset Number Tuning; Selecting A Preset Number On The Main Unit - Aiwa CX-NMT720 Operating Instructions Manual

0-9,+1
o
TUNER
BAND
The unit can store a total of 32 preset stations, When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly,
1
2
Press BAND to select a band.
'M% }
":*;
Press numbered buttons O-9 and +1 O to select a '":~~:
preset number.
Example:
To select preset number 20, press
+10, +10
and 0,
g
To select preset number 15, press
+10
and 5.
$$:.
Selecting a preset number on the main unit
E
,,. ,,1
'a ":, ;::
Press TUNER BAND
to select a band. Then, press, <E* ~! ""
.,,.,. -,
DIRECTION/PRESET repeatedly or turn MULTI JOG.
$:*,;
Each time +P DIRECTION/PRESET is pressed, the
next #$
ascending number is selected.
w
~
To clear a preset station
Select the preset number of the stationto be cleared. Then, press
CLEAR, and press II SET
within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one,
1
2
3
Press TUNER BAND to select a band, and press
< DOWN or FF UP to select a station.
Press 11 SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station,
Preset number
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored,
——
To change the AM tuning interval
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press
POWER while pressing TUNER BAND.
To reset the interval, repeat this procedure.
m
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
ENGLISH 1:2