Table of Contents
Advertisement
Figure 17. FLIR Camera Controller GUI Connection Window Part 1
4. Select Serial (RS-232), select 921600 as the Baud Rate for fastest communication, and click Finish.
If there are more than one serial communication ports enabled on the computer, the button will
display Next.
Figure 18. FLIR Camera Controller GUI Connection Window Part 2
5. If required, select the Com port listed in the Device Manager and click Finish. The camera selection
can also be switched by selecting
interface window.
The information contained in this document pertains to a dual use product controlled for export by the Export Administration
Regulations (EAR). Diversion contrary to US law is prohibited. US Department of Commerce authorization is not required prior to
export or transfer to foreign persons or parties unless otherwise prohibited.
Select
from the Camera pull-down menu at the top of the user
Page 26
Advertisement
Table of Contents
