Table of Contents
Advertisement
UM1671
2.2
MDK-ARM toolchain
1.
Open the Keil MDK-ARM Microcontroller Kit.
Figure 8
2.
In the Project menu, select Open Project... Browse to select either an example or
demonstration or template project file, and click Open to launch it in the Project
window.
3.
In the Project menu, select Rebuild All target files to compile your project.
4.
If your project is successfully compiled, the window shown in
Executing and debugging firmware using a software toolchain
shows the basic names of the Keil uVision4 windows referred to in this document.
Figure 9. MDK-ARM project successfully compiled
DocID025194 Rev 1
Figure 7. IAR Go button
Figure 8. uVision4 IDE
Figure 9
is displayed.
11/19
18
Advertisement
Table of Contents
Need help?
Do you have a question about the STM32F401 Discovery and is the answer not in the manual?
Questions and answers