HP Engage Go Convertible System Maintenance & Service Manual page 75

Table 9-3 Computer Setup—Advanced (for advanced users) (continued)
Option Description
Lets you delete any previously loaded custom boot keys. Clearing keys will disable secure boot. Default is
disabled.
Reset Security Boot keys to factory defaults
Default is disabled.
Enable MS UEFI CA key
Lets you enabled the Certification Authority key. Default is enabled.
Ready BIOS for Device Guard Use
Requires BIOS Administrator password to be configured and Secure Boot to be enabled.
System Options Hyperthreading
Lets you control processor capability.
Virtualization Technology (VTx)
Enables the virtualization features of the processor. Changing this setting requires turning the computer
off and then back on. Default is disabled.
Virtualization Technology for Directed IO (VTd)
Grants virtual machines direct access to peripheral devices on select Intel-based systems. Default is
disabled.
M.2 WLAN/BT
Select to show the device in the operating system. Default is enabled.
M.2 SSD
Select to show the device in the operating system. Default is enabled.
Allow PCIe/PCI SERR# Interrupt
Allows PCI devices to report PCI/PCIe System Error signals, such as address parity errors, data parity
errors, and critical errors other than parity. Default is enabled.
Power Button Override (disable/4 sec/15 sec)
Lets you disable or enable and select the number of seconds you have to hold down the power button for
it to override the system. Default is '4 sec'.
Built-In Device Options Embedded LAN Controller
Select to show the device in the operating system. Default is enabled.
Wake On LAN
Lets you either disable the Wake On LAN feature, or configure where the computer boots, including the
network or hard drive. Default is Boot to Network.
Video memory size
Choose either 32 MB, 64 MB, 128 MB, 256 MB, or 512 MB. Default is 32 MB.
Touch Device
Select to show the device in the operating system. Default is enabled.
Audio Device
Select to show the device in the operating system. Default is enabled.
Internal Speakers (does not affect external speakers)
Select to show the device in the operating system. Default is enabled.
Computer Setup (F10) Utilities 67