Sim Board - HP Engage Go Convertible System Maintenance & Service Manual

SIM board

To remove the SIM board:
1. Prepare the computer for disassembly (see
2. Remove the hand strap (see
3. Remove the rear cover (see
4. Disconnect the battery (see
5. Remove the display (see
6. From the back of the chassis, disconnect the cable from the system board (1).
7. From the front of the chassis, remove the SIM insert from the SIM board (1).
8. Remove the screw that secures the SIM board to the computer (2), and the lift the board out of the
computer (3).
To install the SIM board, reverse the removal procedures.
Preparing to disassemble the computer on page
Hand strap on page 38).
Backplate on page 39).
Battery on page 44).
Display on page 40).
37).
SIM board 45