Advanced - Billion BiPAC 8700NEXL R2 User Manual

Advanced

Here users can set some advanced parameters about wireless.
Band: In the 2.4 GHz radio frequency.
Channel: Choose a channel to use. Here is a list of available channels or select Auto mode instead.
Scan Used Channel: Press the button to scan and list all channels being used.
Auto Channel Timer (min): Available when Auto Channel is selected. The auto channel times
length it takes to scan in minutes.
802.11n/EWC: Select to auto enable or disable 802.11n.
Bandwidth: The higher the bandwidth the better the performance will be but greater interference
with other wireless devices. Select 20MHz for lessen radio interference.
Control Sideband: Only available for 40MHz. It allows you to select upper sideband or lower
sideband. Sideband refers to the frequency band either above (upper sideband) or below (lower
sideband) the carrier frequency, within which fall the spectral components produced by modulation
of a carrier wave.
802.11n Rate: This allows you to select the fixed transmission rate or auto.
802.11n Protection: Turn off for maximize throughput.
Support 802.11n Client Only: Turn on the option to only provide wireless access to the clients
88