Branch Office Installation; Provide The Firewall Serial Number To The Central Administrator - Cisco Firepower 1100 Started Manual

Firepower Threat Defense Deployment with CDO and Low-Touch Provisioning

Branch Office Installation

After you receive the FTD from your corporate IT department, you need to record the firewall's serial number
and send it to the CDO administrator. Outline a communication plan for the onboarding process. Include any
key tasks to be completed and provide points of contact for each item.
Then, you need to cable and power on the firewall so that it has internet access from the outside interface.
The CDO administrator can then complete the onboarding process.
Tip You can
provisioning.

Provide the Firewall Serial Number to the Central Administrator

Before you rack the firewall or discard the shipping box, verify that your firewall can be deployabled using
low-touch provisioning, and record the serial number so you can coordinate with the central adminstrator.
Note This procedure assumes you are working with a new firewall running FTD Version 6.7 or later.
Procedure
Step 1 Unpack the chassis and chassis components.
Cisco Defense Onboard the Device Using Low-Touch Provisioning and the Serial Number,
Orchestrator on page
(CDO Admin)
Cisco Commerce (Optional) Obtain feature licenses
Workspace
(CDO Admin)
Smart Software Generate a license token
Manager
(CDO Admin)
Cisco Defense Register the device with the Smart Licensing Server
Orchestrator page
(CDO Admin)
Cisco Defense Manage the Device with CDO, on page
Orchestrator
(CDO Admin)
watch this video to see how a Branch employee onboards a firewall using CDO and low-touch
15.
(Configure Licensing, on page
16).
Cisco Firepower 1100 Getting Started Guide
Branch Office Installation
(Configure Licensing, on page
16).
(Configure Licensing, on
21.
16).
7