Detectable Gases; Detector Versions; Analog (Ma) Output Versions - Honeywell Sensepoint XCL Installation Manual

Introduction

1.4 Detectable Gases

Sensepoint XCL is available for the detection of the following gases:
For additional combustible gas availability, contact Honeywell
Analytics.

1.5 Detector Versions

The 4-way terminal block(s) provide connection for both the gas
detector output and the power supply. Assignment of the terminals and
additional terminal blocks will vary dependent on the version.

Analog (mA) Output Versions

1) +24 V DC or 24 V AC
3) 4 to 20 mA
For details on wiring for the analog output version, see Wiring of mA
Output Versions on page 16 and also Current Source/Sink Selection on
page 17.
8
All manuals and user guides at all-guides.com
Oxygen (O )
2
Toxic gases
– Ammonia (NH )
3
– Carbon monoxide (CO)
– Hydrogen (H )
2
– Hydrogen sulfide (H
– Nitrogen dioxide (NO
Combustible gases
– Methane (CH )
4
S)
2
)
2
2) 0 V or 24 V AC
4) Common