JRC Alphatron Marine AlphaAnnounce Installation And Operation Manual page 69

GROUP 2–button
Group 2 paging zone selection and deselection.
Decrease of backlight brightness of buttons when pushed over 2 seconds.
GROUP 3 and 4–button
Group 3 and 4 paging zone selection and deselection.
GENERAL ALARM–button
Push over 2 seconds to activate defined prerecorded GENERAL ALARM–message.
FIRE ALARM–button
Push over 2 seconds to activate defined prerecorded FIRE ALARM–message.
ALL CALL –button
ALL CALL paging zone selection and deselection.
STATUS/RESET –button
Short push clears all selected zones.
Pushing over 2 seconds during message repetition ends the message.
Pushing over 2 seconds clears active faults.
FAULT- indication (lit up) is active, if any fault has been detected in the system.
Note This is the default factory configuration. The functions for the buttons can be configured.
Note Faults are indicated only if monitoring is activated.
69 | AlphaAnnounce Control Panel