Backyard Discovery SKYFORT II SWING SET Owner's Manual & Assembly Instructions page 40

STEP 3
PLACE (1) SLIDE RAIL ASSEMBLY ON A FLAT SURFACE AND BEGIN INSERTING SLIDE BED AT THE BOTTOM OF
THE SLIDE RAIL (FIG. 1). HAVE A HELPER BEND THE SLIDE BED TOWARDS THE TOP OF THE SLIDE AND INSERT
THE BED INTO THE SLIDE CAVITY. MAKE SURE SLIDE BED IS COMPLETELY DOWN IN THE SLIDE CAVITY.
INSERT THE (4) SLIDE SUPPORT TUBES INTO THEIR RESPECTIVE PILOT LOCATIONS (FIG. 2).
SLIDE BED 10' LIGHT GREEN
DW - SLIDE SUPPORT TUBE 21.34x2.77x505 - A100034
21.34 OD x 2.77 W x 505
10 FOOT SLIDE ASSEMBLY
DW - SLIDE SUPPORT TUBE 21.34x2.77x505
44