Tools Required For Installation - Backyard Discovery SKYFORT II SWING SET Owner's Manual & Assembly Instructions

Tools Required for Installation:

(These are the tools that are generally required for assembly of our outdoor products.
These tools are not included with the outdoor product purchase.)
(Level 24")
(Phillips Screw Driver)
(Tape Measure)
(Cordless Drill or
Electric Drill)
(An Adult w/ an
Adult Helper)
(Open End Wrenches 1/2",
& 9/16")
(Claw Hammer)
(1/8", 3/16", 3/8", &
7/16" Drill Bits)
(Ladder)
12
(Square)
(Drill Attachments:
Phillips Head)
(Rubber Mallet - Optional)
(3/8" Drive Ratchet, 1/2" &
9/16" STD Sockets 1/2" & 9/16"
Deep Sockets)