Advertisement

Quick Links

WARNING
Adult Assembly Required.
Not suitable for children under
two years, due to sharp points
and small parts
WARNING, ONLY FOR DOMESTIC USE.
CAN ICES-003 (B)/NMB-003(B)
SAVE THIS ASSEMBLY MANUAL FOR FUTURE REFERENCE IN THE EVENT THAT
Made in China | INS-2001312-A-SWEETWATER-ENG 01/12/2021
Sweetwater
Model # 2001312
.
assembly time may vary based on skill level
For the most up to date assembly manual,
to register your set, or to order replacement parts please visit
www.backyarddiscovery.com
YOU NEED TO ORDER REPLACEMENT PARTS.
Playhouse
Owner's Manual & Assembly Instructions
average 2 person assembly time
MANUFACTURED BY:
Backyard Discovery
3305 Airport Drive
Pittsburg, KS 66762
800-856-4445

Advertisement

Table of Contents
loading

Summary of Contents for Backyard Discovery Sweetwater 2001312

  • Page 1 MANUFACTURED BY: Playhouse Sweetwater Backyard Discovery 3305 Airport Drive Pittsburg, KS 66762 Model # 2001312 Owner's Manual & Assembly Instructions 800-856-4445 WARNING Adult Assembly Required. Not suitable for children under two years, due to sharp points and small parts WARNING, ONLY FOR DOMESTIC USE.
  • Page 2 INSTALLATION SERVICES AVAILABLE! Need a helping hand? Let our team of professionals handle the installation for you! *Installation services are only available to U.S. customers. With Go Con! gure, we bring you 18 years of experience right to your doorstep. We service a wide array of indoor and outdoor recreation products that most consumers don’t have the time or ability to deliver &...
  • Page 3 Owner’s Manual Please Read This Before Starting Assembly MISSING A PART? CALL US BEFORE GOING BACK TO THE STORE The store where you made your purchase does not stock parts for this item. If you have assembly questions or you are missing or have damaged parts, please call 1-800-856-4445 you can also visit www.backyarddiscovery.com...
  • Page 4: Limited Warranty

    Botanical, Adventure Playsets, and Leisure Time Products. Backyard Discovery warrants that this product is free from defect in materials and workmanship for a period of one (1) year from the original date of purchase. This one (1) year warranty covers all parts including wood, hardware, and accessories. All wood carries a ! ve (5) year pro-rated warranty against rot and decay. Refer to the schedule below for charges associated with replacement of parts under this Limited Warranty.
  • Page 5 Owner’s Manual Operating Instructions and Safety Warnings WARNING: BURN HAZARD • Pay special attention to plastic and metal surfaces as they may be hot enough to cause burns. • Always check the temperature of the product before NOTE: letting your children play on it. •...
  • Page 6: Suggested Playground Surfacing

    Owner’s Manual Please Read This Before Starting Assembly Positioning Your Playhouse Suggested Playground Surfacing • The playhouse is designed to be installed on a • Do not install home playground equipment over concrete, asphalt, packed earth, grass, carpet, level surface by an Adult with an Adult helper. or any other hard surface.
  • Page 7 Owner’s Manual Please Read This Before Starting Assembly APPENDIX A X3.1.3.2 Do not install loose- ll surfacing over hard The following information is from the United States surfaces such as concrete or asphalt. Consumer Product Safety Commission’s Information X3.1.4 Poured-In-Place Surfaces or Pre-Manufactured Sheet for playground surfacing material;...
  • Page 8 • Check all moving parts including swing seats, Backyard Discovery assumes no responsibility or ropes, cables, and chains for wear, rust, or other liability for any charge incurred by the Customer for deterioration.
  • Page 9: Instructions For Proper Maintenance

    About Our Wood Backyard Discovery uses 100% Cedar (C. Lanceolata) wood. Although we take great care in selecting the best quality lumber available, wood is still a product of nature and susceptible to weathering which can change the appearance of your set.
  • Page 10 Owner’s Manual Assembly Tips Protrusion Hazard Incorrect Correct If you see exposed threads and your bolt protrudes beyond the T-Nut you may have over tightened the bolt or used incorrect hardware. If you’ve overtightened, remove the bolt and add washers to eliminate the protrusion.
  • Page 11: Assembly Tip

    Owner’s Manual Assembly Tips ASSEMBLY TIP: Keep and eye out for these boxes which will contain helpful pictures and information making the assembly process as quick and painless as possible. Sorting Wood When removing the wood from the boxes we recommend arranging them by part number before you begin assembly.
  • Page 12 Owner's Manual Tools Required for Installation...
  • Page 13 Owner's Manual Basic Setup Dimensions & Assembly Notes Selecting the correct location for your play product is important for your children’s safety and the product’s longevity The safe play area refers to a zone extending 6'-7" (2m) beyond the play product on all sides, including the space •...
  • Page 14: Parts Identification

    Parts Identification Owner's Manual Wood Components (Not to Scale) SIDE WINDOW SHELF - W4L13453 COUNTER TOP SUPPORT - W4L13444 1 3/8”x4 3/8”x5 7/8” (36x112x150) 5/8”x2 3/8”x18 7/8” (16x60x479) (x1) (x2) COUNTER TOP SUPPORT - W4L13445 REAR WINDOW SHELF - W4L13448 1”x2 3/8”x5 7/8”...
  • Page 15 Parts Identification Owner's Manual Wood Components (Not to Scale) RIGHT REAR CORNER PANEL - W2A02994 LEFT REAR CORNER PANEL - W2A02993 (x1) (x1) LEFT FRONT CORNER PANEL - W2A02991 (x1) RIGHT FRONT CORNER PANEL - W2A02992 (x1) LOWER CENTER WALL - W2A02978 UPPER REAR CENTER WALL - W2A02989 1 1/2"x6 5/8"x20 7/8"...
  • Page 16: Hardware Components

    Owner's Manual Parts Identification Hardware Components H100090 SCREW PFH (x7) 8x2 1/2" H100137 BOLT WH H100124 SCREW PFH (x5) 1/4x1 (x2) 8 x 1/2 H100086 SCREW PFH (x24) 8x1 1/2 H100140 NUT BARREL WH H100070 SCREW PWH (x5) 1/4x7/8 (x9) 8x3/4 H100087 SCREW PFH...
  • Page 17 Owner's Manual Parts Identification Accessory Components (Not to Scale) A6P00387 A6P00025 FLOWER POT HOLDER - BLK STOVE KIT (x2) (x1) A6P00020 A6P00024 A100132 KNOB KIT FAUCET KIT PHONE KIT (x1) (x1) (x1) BE SURE TO WASH ALL PLASTIC TOYS BEFORE USE. A6P00336 A6P00337 A6P00338...
  • Page 18 Owner's Manual Parts Identification Accessory Components (Not to Scale) A4M00517 METAL TIE STRAP (x1) A6P00032 SURFACE MOUNT BASIN (x1) A100314 "A" REVISION TAG (x1) A4M00528 BYD ID TAG (MEDIUM) AGES 2 TO 10 (x1) A6P00290 DOOR BELL PLATE A100174 (x1) DOOR BELL (x1)
  • Page 19 STEP 1 LEFT REAR CORNER PANEL - W2A02993 RIGHT REAR CORNER PANEL - W2A02994 (x1) (x1) RIGHT FRONT CORNER PANEL - W2A02992 LEFT FRONT CORNER PANEL - W2A02991 (x1) (x1) NOTE: POSITION WALL PANELS AS SHOWN BELOW. VERIFY THE CORRECT PANEL PLACEMENT BY CHECKING THE HOLE LOCATIONS AS SHOWN BELOW.
  • Page 20 STEP 2 H100085 SCREW PFH LOWER CENTER WALL - W2A02978 UPPER CENTER WALL - W2A02979 (x10) (x1) 1 1/2"x6 5/8"x20 7/8" (38x167x530) (x1) 1 1/2"x9 3/4"x20 7/8"(38x248x530) (x1) LOWER CENTER WALL (x1) UPPER CENTER WALL (x10) SCREW - 1"...
  • Page 21 STEP 3 H100085 SCREW PFH LOWER REAR CENTER WALL - W2A02990 (x10) UPPER REAR CENTER WALL - W2A02989 (x1) 1 1/2"x6 5/8"x21 1/8" (38x167x536) 1 1/2"x21 1/8"x9 3/4" (38x536x248) (x1) (x1) UPPER REAR CENTER WALL (x10) SCREW - 1" (x1) LOWER REAR CENTER WALL...
  • Page 22 STEP 4 H100085 SCREW PFH LOWER CENTER WALL - W2A02978 UPPER CENTER WALL - W2A02979 (x10) (x1) 1 1/2"x6 5/8"x20 7/8" (38x167x530) (x1) 1 1/2"x9 3/4"x20 7/8"(38x248x530) (x1) UPPER CENTER WALL (x10) SCREW - 1" (x1) LOWER CENTER WALL...
  • Page 23: Side View

    STEP 5 H100088 SCREW PFH (x6) 8x1 1/8 DOOR ASSEMBLY - W2A02980 1 1/4""x17 15/16""x13 1/8"" (32x456x334) (x1) SIDE VIEW NOTE PILOT HOLES (x6) SCREW - 1 1/8" (x1) DOOR ASSEMBLY...
  • Page 24 STEP 6 A4M00517 H100070 SCREW PWH METAL TIE STRAP (x1) (x8) 8x3/4 TIP: ALIGN TIE STRAP WITH PILOT HOLES AND ASSEMBLE AS SHOWN. NOTE PILOT HOLES (x8) SCREW - 8x3/4" (x1) METAL TIE STRAP...
  • Page 25: Header Assembly

    STEP 7 H100090 SCREW PFH (x4) 8x2 1/2" HEADER ASSEMBLY - W2A02981 3 3/8"x37 7/8"x38 7/8" (86x962x986) (x2) NOTE: REST HEADER ASSEMBLIES ON THE WALL PANELS AND ASSEMBLY AS SHOWN. (x2) NOTE NOTCH HEADER ASSEMBLY LOCATION. (x4) SCREW - 2 1/2"...
  • Page 26 STEP 8 H100087 SCREW PFH TIE STRAP - W4L13443 (x32) 8x1 1/4 (x8) 5/8”x2”x3 1/8” (16x50x80) (x8) TIE STRAP NOTE PILOT HOLES (x32) SCREW - 1-1/4"...
  • Page 27 STEP 9 GABLE BOARD - W4L13447 H100139 H100140 H100137 BOLT WH H100138 WASHER LOCK EXT WASHER LOCK EXT NUT BARREL WH 5/8”x4 3/8”x25 3/8” (16x112x643) (x4) (x4) (x4) (x4) 8x15 (x4) 1/4x7/8 1/4x1 6x15 (x4) BOLT WH - 1" (x4) WASHER - 6x15 (x4) WASHER - 8x15...
  • Page 28 STEP 1 0 TRIANGLE SUNBURST - W4L13450 5/8”x5 1/4”x10 3/8” (16x134x265) (x2) H100086 SCREW PFH H100088 SCREW PFH (x4) 8x1 1/2 (x20) 8x1 1/8 SUNBURST LEG - W4L13451 SUNBURST LEG - W4L13452 (x2) 5/8”x2 3/8”x10 1/4” (16x60x260) 5/8”x2 3/8”x8 1/4” (16x60x210) (x4) (x1) SUNBURST LEG...
  • Page 29 STEP 1 1 H100086 SCREW PFH (x8) 8x1 1/2 UPPER ROOF PANEL - W2A02983 (x2) 1 3/8"x12 3/4"x44 7/8" (35x324x1140) REPEAT ON OPPOSITE END (x4) SCREW - 1 1/2" (x2) UPPER ROOF PANEL...
  • Page 30 STEP 1 2 H100086 SCREW PFH (x8) 8x1 1/2 LOWER ROOF PANEL - W2A02982 1 3/8"x13"x44 7/8" (35x329x1140) (x2) REPEAT ON OPPOSITE END (x4) SCREW - 1 1/2" (x1) LOWER ROOF PANEL (x1) LOWER ROOF PANEL...
  • Page 31: Inside View

    STEP 1 3 H100087 SCREW PFH SIDE WINDOW SHELF - W4L13453 (x2) 8x1 1/4 5/8”x2 3/8”x18 7/8” (16x60x479) (x1) INSIDE VIEW FLUSH (x2) SCREW - 1-1/4" (x1) SIDE WINDOW SHELF...
  • Page 32 STEP 1 4 H100087 SCREW PFH REAR WINDOW SHELF - W4L13448 (x2) 8x1 1/4 5/8”x2 3/8”x19 1/8” (16x60x485) (x1) INSIDE VIEW FLUSH (x2) SCREW - 1-1/4" (x1) REAR WINDOW SHELF...
  • Page 33 STEP 1 5 H100087 SCREW PFH SIDE WINDOW SHELF - W4L13453 (x2) 8x1 1/4 5/8”x2 3/8”x18 7/8” (16x60x479) (x1) INSIDE VIEW FLUSH (x2) SCREW - 1-1/4" (x1) SIDE WINDOW SHELF...
  • Page 34 STEP 1 6 H100090 SCREW PFH COUNTER TOP SUPPORT - W4L13444 (x2) 8x2 1/2" 1 3/8”x4 3/8”x5 7/8” (36x112x150) (x1) NOTE: ALIGN PILOT HOLES IN D1 AND ASSEMBLE. (x1) COUNTER TOP SUPPORT (x2) SCREW - 2 1/2"...
  • Page 35 STEP 1 7 H100087 SCREW PFH COUNTER TOP SUPPORT - W4L13445 (x4) 8x1 1/4 1”x2 3/8”x5 7/8” (24x60x150) (x2) INSIDE VIEW 7/8 in [22 mm] (x1) COUNTER TOP SUPPORT (x2) SCREW - 1-1/4" REPEAT ON OPPOSITE WALL...
  • Page 36 STEP 1 8 H100087 SCREW PFH COUNTER TOP - W4L13446 (x8) 8x1 1/4 (x4) 5/8”x3 3/8”x18 1/2” (16x86x469) (x8) SCREW - 1-1/4" (x4) COUNTER TOP...
  • Page 37 STEP 1 9 H100128 SCREW PWH A100314 "A" REVISION TAG (x2) 8x5/8 (x1) (x2) (x1) SCREW - 5/8 "A" REVISION TAG MOUNT IN THE APPROXIMATE LOCATION SHOWN ABOVE.
  • Page 38: Front View

    STEP 20 H100086 SCREW PFH (x2) 8x1 1/2 A6P00024 FAUCET KIT (x1) FRONT VIEW 1 in [25 mm] (x2) SCREW - 1 1/2" (x1) FAUCET KIT...
  • Page 39 STEP 21 H100128 SCREW PWH (x2) 8x5/8 A6P00032 SURFACE MOUNT BASIN (x1) FRONT VIEW 3/8 in [9 mm] (x2) SCREW - 5/8 (x1) SURFACE MOUNT BASIN...
  • Page 40 STEP 22 H100088 SCREW PFH (x4) 8x1 1/8 A6P00025 STOVE KIT (x1) (x4) SCREW - 1 1/8" 1 1/8 in [29 mm] (x1) STOVE KIT...
  • Page 41 STEP 23 H100087 SCREW PFH DOOR STOP - W4L13449 (x3) 8x1 1/4 5/8”x2 3/8”x3 7/8” (16x60x100) (x1) (x1) DOOR STOP (x3) SCREW - 1-1/4" 1 5/8 in [40 mm]...
  • Page 42 STEP 24 A6P00020 KNOB KIT (x1) TIP: WHEN DOOR LATCH IS IN THE UNLOCKED POSITION IT SHOULD FACE IN THE UPWARD DIRECTION. NOTE ARCH IN FACE PLATE FACES UP. (x1) LATCHING KNOB KIT LATCH KNOB SCREW - 1" (x1) INCLUDED IN KNOB KIT FACE PLATE SCREW - 3/4"...
  • Page 43 STEP 25 H100124 SCREW PFH (x2) 8 x 1/2 A100132 PHONE KIT (x1) TIP: CENTER PHONE AND MOUNT USING THE DIMSENSION BELOW OR YOUR DESIRED LOCATION. (x1) PHONE KIT (x2) SCREW PFH 8x1/2...
  • Page 44 STEP 26 H100085 SCREW PFH (x8) A6P00387 FLOWER POT HOLDER - BLK (x2) REPEAT ON OPPOSITE SIDE (x1) FLOWER POT HOLDER - BLK (x4) SCREW - 1" NOTE HOLE LOCATIONS...
  • Page 45 STEP 27 H100361 SCREW PWH BLK (x2) 8x7/16 A4M00528 BYD ID TAG (MEDIUM) AGES 2 TO 10 (x1) (x1) BYD ID TAG (MEDIUM) AGES 2 TO 10 (x2) SCREW - 7/16"...
  • Page 46 STEP 28 H100537 SCREW PFH SD H100624 SCREW PFH BLK (x2) (x2) 6x5/8 A100174 A6P00290 DOOR BELL DOOR BELL PLATE (x1) (x1) NOTE PILOT HOLES. (x1) DOOR BELL PLATE (x1) DOOR BELL (x2) SCREW - 5/8" (x2) SCREW - 1"...
  • Page 47 STEP 29 A100174 DOOR BELL (x1) NOTE: -DO NOT MIX OLD AND NEW BATTERIES. -DO NOT MIX ALKALINE, STANDARD (CARBON-ZINC), OR RECHARGEABLE (NI-CAD, NI-MH, ETC.) BATTERIES. -NON-RECHARGEABLE BATTERIES ARE NOT TO BE RECHARGED. -ONLY BATTERIES OF THE SAME OR EQUIVALENT TYPE AS RECOMMENDED ARE TO BE USED.

This manual is also suitable for:

Sweetwater2001312

Table of Contents