Part No. 15H145, 15J902, And 17R641 Electronic Control Panel - Graco SaniForce BES Series Instructions-Parts List Manual

Part No. 15H145, 15J902, and 17R641 Electronic Control Panel

Ref. Key Switch/Button Name
A SEAL INFLATE
B RAM JOG
C RAM UP
D RAM PRESS
E STOP
F PUMP SPEED SWITCH
G MODE SELECTOR SWITCH
H EMERGENCY STOP
J START
K POWER
*The air cylinder will stabilize in its current position.
F . 12: Part No. 15H145 and 15J902 Electronic Control
IG
311163ZAH
D
B
C
A
F
Operation
Press to inflate ram plate seal
Press button to slowly lower ram (by exhausting ram up
air pressure). Generally used when guiding ram plate into
bin or making system adjustments.
Press button to raise ram.
Press button to lower ram onto material using air pres-
sure.
Press button to stop operation of the pumps, ram and
automatic cycle.*
Turn switch to select the pump speed.
Turn switch to select the ram operation mode.
Press button to immediately shut off air to the system and
stop operation.*
Press button to begin operation.
Press button to enable power to the electronic control
panel.
G E
Electronic Control System
J
K
H
21