Panasonic Aicure UJ20 Series How To Use Manual page 2

Emergency stop of UV irradiation - 1:
EMERGENCY signal
Use the [EMER] signal to stop the UV irradiation of UJ20.
Terminals [11] and [12] are shorted by a shorting bar as a factory default.
Connect an emergency stop SW between these terminals so that the signal input can be
turned off when the SW is pressed, and a forced stop of UV irradiation will be possible even
in the middle of the process.
1: While the [EMER] signal input is off, the [READY] signal is off,
and UV irradiation is not possible.
2: If the [EMER] input is turned off during UV irradiation,
it will stop, and the [ERROR] signal will be output.
2
Equipment
design
Connect an emergency
stop SW between
[EMER]=[11] and
[COM]=[12] by B-contact.
Matsushita Electric Works, Ltd.
Global Marketing Division