About The Stretcher; Description; Vehicle Considerations; General Specifications - Ferno 50-E User Manual

Easy load stretcher
Table of Contents

Advertisement

About the Stretcher

3.1 Description

The Model 50-E Series Easy Load Stretcher is an
emergency patient-handling device. Its components are
a Model 155-E removable stretcher top and a Model
50-E undercarriage. In this manual, the system of
stretcher top plus undercarriage will be referred to as
the "stretcher."
The stretcher is for use by trained operators. Ferno
strongly recommends using two operators, even though
the stretcher can be operated by one trained operator.
The stretcher is designed for roll-in loading to help
reduce the risk of back injury to medical service
personnel.
STRETCHER TOP FEATURES
Side rails
Carrying handles
4 Positions (recumbent, 2 shock, and chair)
Infinitely-adjustable gas-assist backrest
Quick Fix lock
UNDERCARRIAGE FEATURES
5 Level positions with multi-level positioning (can
be locked into a different level at each end)
Automatic head-end-leg safety lock touch bar
Automatic foot-end-leg release touch bar
150 mm casters with swivel locks (head end)
125 mm casters with wheel locks (foot end)
Loading wheels and intermediate loading wheels
WARNING
!
Improper use of the stretcher can cause
injury. Use the stretcher only for the purpose
described in this manual.
8
3 - ABOUT THE STRETCHER

3.2 Vehicle Considerations

The ambulance patient compartment must have:
A smooth, level floor large enough for the
stretcher.
An approved, installed Ferno stretcher fastener
configured for use with the Model 50-E.
Floor height at the specified dimension (see the
Loading Height on page 9).
If needed, modify the ambulance to fit the stretcher by
adding ramps, a folding rear step, etc. Do not alter the
stretcher or the stretcher operating procedures.
WARNING
!
Modifying the stretcher can cause
unpredictable operation and injury. Do not
alter or modify the stretcher to fit the
ambulance.

3.3 General Specifications

General specifications are rounded to the nearest whole
number.
Stretcher-top heights are measured from the
ground with the stretcher top removed from the
undercarriage.
Stretcher heights are measured from the ground
to the top of the stretcher top main frame.
Weights do not include the mattress, restraints,
equipment brackets, or accessories.
Loading height is measured from the ground to
the bottom of the front loading wheels.
Ferno reserves the right to change specifications
without notice.
© Ferno-Washington, Inc. 234-3257-01 December, 2004
Ferno Model 50-E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents