Figure 23 - Attaching A Brackrest Strap Bracket To A Mounting Post; Figure 24 - Fitting The Retaining Plug; Ferno-Washington, Inc. 234-3257-01 December - Ferno 50-E User Manual

Ferno Model 50-E
ATTACH THE MATTRESS
1. Make sure the one-piece restraints and the pelvis
strap are unbuckled and the ends of the straps
positioned out of the way.
2. Fit the mattress and linen to the stretcher top.
ATTACH THE HARNESS
1. Position the harness as shown in Figure 17 on
page 19 with:
• the torso straps and links facing the head end.
• the cross-strap brackets near the posts on the
backrest.
2. Hook the cross strap-brackets to the posts on each
side of the backrest frame. Pull the brackets to
seat the posts in the brackets (Figure 23).
3. Push the black retaining plugs into the metal
brackets to secure the brackets to the stretcher
top frame (Figure 24).
© Ferno-Washington, Inc. 234-3257-01 December, 2004
Figure 23 - Attaching a Backrest Strap
Bracket to a Mounting Post

Figure 24 - Fitting the Retaining Plug

Setup
Post
21