Lubricating The Stretcher - Ferno 50-E User Manual

Maintenance

8.8 Lubricating the Stretcher

Use the lubricants designated below to lubricate the
stretcher and stretcher top. Do not lubricate points
marked with the symbol.
Reference # Points
................ 3 ............Lock pin spring ..................................................... WRL-191-S or 10W-30 synthetic oil
................ 2 ............Metal 'T' castings ................................................. WRL-191-S or 10W-30 synthetic oil
................ 3 ............Metal saddle (top of leg) ....................................... WRL-191-S or 10W-30 synthetic oil
................ 2 ............Bottom of I-beam channel (each side) .................. WRL-191-S or 10W-30 synthetic oil
................ 2 ............Stretcher top folding handles ................................................ ZEP 45 Teflon-based spray
................ 1 ............Stretcher top position lock .............ZEP 45 Teflon-based spray or 10W-30 synthetic oil
................ 2 ............Side rail release pins ......................ZEP 45 Teflon-based spray or 10W-30 synthetic oil
................ 0 ............Swivel release casting/cables ................................................................. Do not lubricate
................ 0 ............Wheels (sealed bearings) ....................................................................... Do not lubricate
................ 0 ............Swivel caster lock pins ................................ Do not lubricate (use soap and water only)
36
LUBRICATION POINTS
(Use a small amount of lubricant)
Component
Important
Lubricating parts that should not be lubricated
allows dirt and foreign particles to collect on
those parts, resulting in damage. Lubricate only
the points numbered below.
© Ferno-Washington, Inc. 234-3257-01 December, 2004
Ferno Model 50-E
Lubricate With