Daikin SkyAir RZR-TA Series Service Manual page 76

Service Settings Menu, Maintenance Menu
Maintenance Menu
Error Display Display error ON
Display error OFF
Display warning ON
Display warning OFF
Swap Unit No. Current Unit No.
Transfer Unit No.
Addressed Sensor Value Unit No.: 0 - 15
Code
00:
01:
02:
03:
04:
05:
06:
07:
08:
09:
Data
1. (For FTQ-TA models)
2. (For FTQ-TA models)
70
Item 2
Displays the error on the screen.
Displays neither errors nor warnings.
Displays a warning on the screen if an error occurs.
No warning is displayed.
A unit No. can be transferred to another.
Select the unit number you want to check.
Remote controller thermistor (°F)
Suction air thermistor (°F)
Heat exchanger liquid pipe thermistor (°F)
Heat exchanger gas pipe thermistor (°F)
Indoor unit address No.
Outdoor unit address No.
Branch selector unit address No.
Zone control address No.
Cooling/Heating batch address No.
Demand/low-noise address No.
The corresponding data will be displayed, based on the unit number
and Code selected.
The actual fan speed is converted into the fan tap to be displayed. Therefore, if the fan
speed is changed by controls or external factors, the airflow rate set with the remote
controller may differ from the fan tap display.
The ON/OFF status of the humidifier connected to HUMIDIFIER on the X1M terminal of
the indoor unit PCB is not displayed. The ON/OFF status of the humidifier connected to
the wiring adaptor is displayed.
Remarks
Part 3 Remote Controller
SiUS281811E