Daikin SkyAir RZR-TA Series Service Manual page 126

Field Setting from Remote Controller
Note(s)
1. Settings are made simultaneously for the entire group, however, if you select the mode No.
inside parentheses, you can also set by each individual unit. Setting changes however
cannot be checked except in the individual mode for those in parentheses.
2. The mode numbers inside parentheses cannot be used by wireless remote controllers, so
they cannot be set individually. Setting changes also cannot be checked.
3. Do not make settings other than those described above. Nothing is displayed for functions
the indoor unit is not equipped with.
4. 88 or Checking the connection. Please stand by. may be displayed to indicate the remote controller is
resetting when returning to the normal mode.
5. If the setting mode set to Equipped, energy recovery ventilator fan conducts the fan residual
operation by linking to indoor unit.
6. Available for setting when option with the built-in human detection and floor temperature
detection functions are mounted.
7. If the airflow setting when thermostat is OFF is set to OFF (12 (22)-3-03, 12 (22)-6-03), the air in the indoor
unit will be stagnant and suction air thermistor may not detect room temperature correctly, resulting in
problems that thermostat will not be ON easily.
Use optional remote sensor in such conditions, or set the field setting 10 (20)-2 to 03 (only remote controller
thermistor).
8. Only for FTQ-TA models.
120
SiUS281811E
Part 5 Field Settings and Test Operation