Daikin SkyAir RZR-TA Series Service Manual page 141

SiUS281811E
1.5.33 Key-lock Pattern Settings
For BRC1E series only
Setting of key-lock pattern for the remote controller.
Mode
 When the Second code No. is set to 04, no menu operation is allowed without key-lock by
pressing and holding the menu button. Set the Second code No. to other than 04 to cancel it.
1.5.34 Setting Restricted/Permitted for Airflow Block
For sensing flow type only
Due to possibility of dew condensation, the airflow block function cannot be enabled when closure
material kit, fresh air intake kit, natural / separately installed evaporation humidifier, or branch air
duct is equipped.
This setting will prevent the airflow block is advertently set to ON.
Ensure that this setting is "Disable airflow block" when using together with options listed above.
1.5.35 Room Temperature Display
For BRC1E series only
A "Detailed display screen" can be selected as the display screen. This setting is used if you do not
want "Room temperature display" to be shown on the "Detailed display screen".
Mode
1.5.36 Thermistor Sensor for Auto Changeover and Setback Control by the
Remote Controller
For BRC1E series only
Select a thermistor to utilize for the cool/heat mode automatic changeover and setback functions.
The sensed temperature will be displayed on the remote controller as the room temperature.
Mode
Part 5 Field Settings and Test Operation
First Code Second Code
No. No. No.
01
02
1b 12
03
04
Mode No. First Code No.
1b 14
First Code Second Code
No. No. No.
01
1c 0
02
First Code Second Code
No. No. No.
01
1c 1
02
Field Setting from Remote Controller
Contents
No operation allowed (Cancel procedure is displayed).
No operation allowed (Cancel procedure is not displayed).
No menu operation is allowed.
No menu operation is allowed any time.
Second Code No.
01
02
03
04
05
Contents
Room temperature is not displayed.
Room temperature is displayed.
Contents
Utilize the return air thermistor
Utilize the remote controller thermistor
: Factory setting
: Factory setting
Contents
Airflow block permitted
—
—
—
Airflow block restricted
: Factory setting
: Factory setting
135