Table of Contents
Advertisement
System example
KP-FD140GV/F140GV/FD83GV/F83GV/FD33GV/F33GV connect to PC using LAN cable.
HITACHI
KP-FD140GV
HITACHI
KP-FD140GV
(*) Note that following point when connecting the camera
(1) Please connect the camera to device for Gigabit Ethernet (1000BASE-T).
(2) Please use LAN cable of CAT5E or more (recommendation: CAT6 straight cable).
(3) To the NIC for Jumbo frame is recommended to be used
Recommended NIC: Intel Pro1000 PT Desktop
(4) When the camera is connected to Laptop PC, please use the one whose built-in LAN is Gigabit Ethernet
(1000BASE-T) correspondence.
The external LAN card (CardBus32 or USB2.0) may not display the cameras ability because of the bus limitation.
ExpressCard is corresponded on the standard but useable product is unconfirmed (.as of April, 2008).
(5) This product prepares the high-performance driver (TurboLinx) and the filter driver (BroadLinx). Please use the driver
according to the usage referring to following specifications.
Corresponded NIC
Other network (In-house LAN, internet etc.)
CPU load
*1: When using high-performance driver, please configure the NIC setting before installation the driver.
(6) Please connect the camera and PC by 1 to 1 as much as possible
Please use the device corresponded to Jumbo frame when using the switching hub etc.
(7) A striped noise might be caused according to the equipment (hub etc.) connected with the camera.
In that case, please connect the cable to another port of the equipment again.
Camera cable
LAN cable
(CAT5E/CAT6)
LAN cable
(CAT5E/CAT6)
High-performance driver
Intel Pro1000series
JU-F30
PoE hub
Unusable
*1
Small
+12V
PC with NIC
for Gigabit
Filter driver
Gigabit Ethernet NIC
Usable
Large
5
Advertisement
Table of Contents
