Input / Output Signal - Hitachi KP-FD140GV Operation Manual

Hide thumbs Also See for KP-FD140GV:

Operation manual (71 pages)

Table Of Contents

Table of Contents

Note: Special function of reset control trigger

The camera shifts to the output of a normal mode (continuous output) when Trigger input signal passes about 1/3

seconds in the state of High. (The image is output by inputting the Trigger at the VD cycle for this period.)

It returns to the Reset control mode if Trigger input signal becomes Low. However, after becoming Low Trigger input

signal, the period of 50 ms becomes a Readout pulse signal input prohibition period.

High

Trigger input

Low

Shutter time

Readout pulse

Data output

4. VD reset

When external VD pulse is inputted, internal VD is reset. Exposure time is established shutter speed.

VD input

(Low active)

Data output

VD output

(Low active)

NOTE: If the external VD of cycle which does not match the camera operation mode is input, shutter time has an error.