Additional Camera Behavior Settings; Configuring Streaming (Quick-Connect Usb Or Quick-Connect Usb Mini) - VADDIO RoboSHOT Series Complete Manual

Complete Manual for RoboSHOT CAT-5 Professional PTZ Camera Systems

Additional Camera Behavior Settings

S , DIP S
YSTEM PAGE WITCHES TAB
Additional features are available on the upper row of soft DIP switches. These settings are the same for all
cameras in the RoboSHOT CAT-5 family.
LED color scheme – Status light color codes for Pro AV (broadcast, the default setting) or UC (unified
n
conferencing).
LED on/off – When the LED is set to OFF, it remains off even when the camera is sending video.
n
Standard Control Mode/Codec Control Mode – Select Codec Control Mode if using the camera with
n
a third-party codec.
Enable LED in Standby – When the LED is enabled in standby mode, it illuminates purple to show
n
that the camera is in standby but connected to power. When the LED is disabled in standby mode, it is
only on when the camera is active (sending video or updating firmware).

Configuring Streaming (Quick-Connect USB or Quick-Connect USB Mini)

S , Q
TREAMING PAGE UICK
The Quick-Connect USB and Quick-Connect USB Mini devices provide streaming capability for
RoboSHOT cameras.
Quick-Connect USB Mini: USB 2.0 streaming only
n
Quick-Connect USB: USB 2.0 or IP (H.264) streaming; configurable
n
The Quick-Connect USB defaults to USB 2.0 streaming.
Most aspects of USB streaming are negotiated automatically between the Quick-Connect device and the
conferencing application, and in many cases no configuration is needed for either USB or IP streaming.
To select the streaming mode (Quick-Connect USB only):
Select the desired streaming mode if necessary. USB streaming is the default. The settings for the
selected streaming mode are highlighted.
-C
ONNECT WEB INTERFACE
78