Safety Precautions; Preparation And Inspection; Operation - JLG 1930ES Operation And Safety Manual
Hide thumbs
Also See for 1930ES:
- Service maintenance manual (212 pages) ,
- Operation and safety manual (114 pages) ,
- Operation & safety manual (50 pages)
Table of Contents
Advertisement
SECTION 5 - ACCESSORIES
WITHOUT 12V OUTLET
ADJUSTABLE
WORK SURFACE
(STOWED)
DECALS
0240087 C
NOTE:
The WorkStation can be attached anywhere in the platform
unless the machine is equipped with another accessory, at which
point the WorkStation must be attached on the opposite side.
Safety Precautions
THIS ACCESSORY WILL AFFECT THE PLATFORM CAPACITY. REFER TO THE CAPACITY
DECAL AND ADJUST ACCORDINGLY.
• Return the adjustable work surface to the stowed position
when finished working.
5-20
WITH 12V OUTLET
OUTLET
0240071D
• Do not drive the machine unless materials are properly
secured or stored.
Preparation and Inspection
• Ensure the WorkStation is secured to the platform.
• Check for any missing or damaged components. Replace if
necessary.
• Check for loose nuts and bolts. If necessary, torque accord-
ing to the Torque Chart specifications in Section 1 of the ES
Scissors Service Manual.
• Replace any missing or illegible decals.
Powered WorkStation Only:
• Ensure the power cable is plugged into the battery, routed
through the frame, and tie-strapped accordingly.
• Inspect 12V outlet and wiring for damage. Replace any
damaged components.
Operation
To use the adjustable work surface, lift the handle and position
across the WorkStation.
3121655
Advertisement
Table of Contents
