Safety Precautions; Preparation And Inspection; Operation - JLG 1930ES Operation And Safety Manual

Safety Precautions

THIS ACCESSORY AFFECTS THE OVERALL PLATFORM CAPACITY. REFER TO THE CAPAC-
ITY DECAL AND ADJUST ACCORDINGLY.
• Ensure no personnel are beneath the platform.
• Do not exit the platform over the rails, or stand on the rails.
• Do not pull wire by driving the machine.
• Only pull wire along the long axis of the machine with the
rack in the working position.
• Ensure wire spools rotate freely.
• Return to the stowed position when not in use.

Preparation and Inspection

• Ensure the rack is secured to the platform.
• Check for missing or damaged components. Replace if
necessary.
• Check for loose nuts and bolts. If necessary, torque accord-
ing to the Torque Chart specifications in Section 1 of the ES
Scissors Service Manual.
3121655
• Replace any missing or illegible decals.
• Ensure release pins are intact and function properly.

Operation

1. Remove release pins and rotate the rack from the stowed
position.
2. Pull the hitch pin for the spool rod to be loaded.
3. Load the spools onto the rod and replace the hitch pin.
4. Swing the rack into working position and lock into place by
replacing the release pin.
5. When not in use, remove spools and return the rack to the
stowed position.
SECTION 5 - ACCESSORIES
5-5