Dmx Input Channel Profiles; D40, D40Xt:vivid, Lustr+, Fire, Ice, Studio Hd; D22 - Lustr+, Studio Hd - ETC D22 Portable Quick Manual

ETC Quick Guide
Desire Fixture Series

DMX Input Channel Profiles

D40, D40XT:Vivid, Lustr+, Fire, Ice, Studio HD; D22 – Lustr+, Studio HD
DMX DMX
Profile Channels
Direct
RGB (Ch. 4 not
used)
HSI
HSIC
Studio
D22, D40, D40XT, D60, D60X Fixtures
Channel Assignments
Vivid, Lustr+
1 - Red
2 - Orange
(White if Lustr+)
3 - Amber
4 - Green
9
5 - Cyan
6 - Blue
7 - Indigo
8 - Intensity
9- Strobe
1-Red
2-Green
5
3-Blue
4 - n/a
5 - Strobe
1 – Hue (coarse)
2 – Hue (fine)
5 3 - Saturation
4 - Intensity
5- Strobe
1 – Hue (coarse)
2 – Hue (fine)
3 - Saturation
6
4 - Intensity
5 - Strobe
6 - Color Point (CCT)
1 – Intensity
2 – Color Point (CCT)
3
3 - Tint
Studio HD
1 - Red
2 - Orange
3 - Amber
Direct control of each individual color with a
separate master intensity channel. Color
4 - Green
calibration of LEDs is not active in this mode.
5 - 3200K White
The nine-channel profile will produce the
6 -5000K White
highest quality color cross fades.
7 - Indigo
8 - Intensity
9- Strobe
Effectively addresses all seven colors via three
channels of control. RGB profile will produce
medium quality color cross-fades
High resolution hue (two channels), saturation,
and intensity control.
HSI mode will produce color cross-fades around
the color space.
High-resolution hue, saturation, and intensity
control as above, with the addition of a color
point channel to adjust the color temperature of
the fixture in both white light and color. Color
cross-fade performance is the same as HSI.
Controls fixture as a white light unit. If no DMX
is present, (i.e. console input), a fixture can be
adjusted for these three parameters on the U/I
at the back of the unit.
Page 6 of 12
Notes
Electronic Theatre Controls, Inc.