ETC Quick Guide
Desire Fixture Series
Plus 7
Strobe
D22, D40, D40XT, D60, D60X Fixtures
Additional profile options
1 – Hue (coarse)
2 - Hue (fine)
3 – Saturation
4 – Intensity
5 – Strobe
6 – n/a
7– Plus 7 Control on/off
8– Red
9– Orange
(white if Lustr+)
10 – Amber
11 - Green
12 - Cyan
13 - Blue
14- Indigo
Variable strobe control: 0% is no strobe. The fixture output will strobe more rapidly as the
strobe-channel value approaches 100%.
Adds seven additional color control channels to
RGB, HSI, HSIC, and Studio input profile
settings. For example HSI with 'Plus 7' enabled
becomes an 14-channel profile
The desired color and intensity are achieved by
using the HSI or RGB channels
Placing channel seven at a value over 51% gives
the fixture a 14 channel profile.
Channels 8-14 represent the native colors of the
fixture and allow the operator to adjust
individual color channels to fine tune the color
output.
Page 7 of 12
Electronic Theatre Controls, Inc.