D22 Portable, D40, D40Xt, D60, D60X; D22 Canopy And D22 Track; D22 Portable, D40, D40Xt, D60 And D60X - ETC D22 Portable Quick Manual

ETC Quick Guide
Desire Fixture Series
Install
With yoke

D22 Portable, D40, D40XT, D60, D60X

Step 1:
Step 2:
Step 3:
Step 4:
WARNING:

D22 Canopy and D22 Track

See the Desire Series D22 Installation Guide for details on installing the Canopy and Track mounted options
of the D22 fixture.
Connect

D22 Portable, D40, D40XT, D60 and D60X

Power In
Power Thru
(Power Thru
not available
on D22)
Step 1:
Step 2:
Step 3:
Step 4:
WARNING:
D22, D40, D40XT, D60, D60X Fixtures
Accessory holder and clip
With floor stand
Hang or mount the fixture.
Attach safety cable.
Insert secondary lens with smooth side out, if desired.
Insert additional accessories if desired. (top hat, egg crate, etc.)
Use only hardware rated for total weight of fixture and accessories.
The safety cable (or other approved safety device) must be securely
attached to the safety cable loop before loosening the clamp.
***There's no UI on D60X
If using external DMX or RDM control, attach a 5-pin XLR cable to DMX In.
Connect power cable to AC power.
Plug the XLR cable into data source, if applicable.
Link any additional fixtures via Power Thru and DMX Thru connectors.
• The D22 fixture does not have the Power Thru option.
• Do not link more than nine fixtures when using Power Thru (non-dimming,
100 to 240 VAC, 50/60 Hz). Power Thru is not available on all Desire Series
fixtures.
• Up to 32 devices can be daisy-chained together per data run.
• Disconnect Power and DMX before all cleaning and maintenance.
Canopy mount
DMX In
DMX Thru
Page 2 of 12
Track mount
(D22 only)
(D22 only)
Electronic Theatre Controls, Inc.