Danfoss VLT CANopen MCA 105 Programming Manual page 34

Parameters
8-19 Product Code
Range:
Size [0 -
related 2147483647]
*
8-46 BTM Transaction Status
Option:
[0] Off
*
[1] Transaction Started
[2] Transaction Comitting
[3] Transaction Timeout
6 6
[4] Err. Non-existing Par.
[5] Err. Par. Out of Range
[6] Transaction Failed
8-47 BTM Timeout
Range:
60 s [1 - 360 s] Select the BTM timeout after a BTM
*
8-48 BTM Maximum Errors
Range:
21 [0 - 21] Selects the maximum allowed number of bulk
*
8-50 Coasting Select
Option:
[0] Digital
input
[1] Bus
[2] Logic AND Activates start command via the fieldbus/serial
[3] Logic OR
*
8-51 Quick Stop Select
Select control of the quick stop function via the terminals (digital
input) and/or via the bus.
Option:
[0]
[1]
[2]
[3]
*
32
Function:
Select 0 to read out the actual
fieldbus product code according
to the mounted fieldbus option.
Select 1 to read out the actual
vendor ID.
Function:
transaction has been started.
Function:
transfer mode errors before aborting. If it is set to
maximum, there is no abort.
Function:
Select control of the coasting function via the
terminals (digital input) and/or via the bus.
Activates start command via a digital input.
Activates start command via the serial
communication port or fieldbus option.
communication port, and 1 extra digital input.
Activates start command via the fieldbus/serial
communication port, or via 1 of the digital
inputs.
Function:
Digital input
Bus
Logic AND
Logic OR
Danfoss A/S © 06/2015 All rights reserved.
®
VLT CANopen MCA 105
8-52 DC Brake Select
Option:
Function:
[0] Digital
input
[1] Bus
[2] Logic
AND
[3] Logic OR Activates start command via the fieldbus/serial
8-53 Start Select
Option:
[0] Digital
input
[1] Bus
[2] Logic
AND
[3] Logic OR
*
8-54 Reversing Select
Option:
[0] Digital
input
[1] Bus
[2] Logic AND Activates the reverse command via the fieldbus/
[3] Logic OR
Function:
Select control of the DC brake via the terminals
(digital input) and/or via the fieldbus.
NOTICE
When parameter 1-10 Motor Construction is
set to [1] PM non-salient SPM, only selection
[0] Digital input is available.
Activates start command via a digital input.
Activates start command via the serial communi-
cation port or fieldbus option.
Activates start command via the fieldbus/serial
communication port, and additionally via 1 of the
digital inputs.
communication port, or via 1 of the digital inputs.
Function:
Select control of the frequency converter start
function via the terminals (digital input) and/or
via the fieldbus.
Activates a start command via a digital input.
Activates a start command via the serial
communication port or fieldbus option.
Activates a start command via the fieldbus/serial
communication port, and additionally via 1 of
the digital inputs.
Activates a start command via the fieldbus/serial
communication port, or via 1 of the digital
inputs.
Function:
Select control of the frequency converter reverse
function via the terminals (digital input) and/or
via the fieldbus.
Activates the reverse command via the serial
communication port or fieldbus option.
serial communication port, and additionally via 1
of the digital inputs.
Activates the reverse command via the fieldbus/
serial communication port, or via 1 of the digital
inputs.
MG92G102