Download Print this page

Safety Instructions; Electrical Connection; Gas Connection - Zanussi ZCG64396XA User Manual

Hide thumbs


Table of Contents
guards incorporated in the appliance. The use of inappropriate
guards can cause accidents.


This appliance is suitable for the following markets:
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
the appliance.
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
enclosed footwear.
Do not pull the appliance by the handle.
The kitchen cabinet and the recess must have
suitable dimensions.
Keep the minimum distance from other
appliances and units.
Make sure that the appliance is installed below
and adjacent safe structures.
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
dangerous parts.
The sides of the appliance must stay adjacent to
appliances or units with the same height.
Do not install the appliance adjacent to a door
or under a window. This prevents hot cookware
to fall from the appliance when the door or the
window is opened.


WARNING! Risk of fire and electric
All electrical connections should be made by a
qualified electrician.
The appliance must be earthed.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
Do not use multi-plug adapters and extension
Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
If the mains socket is loose, do not connect the
mains plug.
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
and contactors.
The electrical installation must have an isolation
device which lets you disconnect the appliance
from the mains at all poles. The isolation device
must have a contact opening width of minimum
3 mm.
Fully close the appliance door, before you
connect the mains plug to the mains socket.


All gas connections should be made by a
qualified person.
Before installation, make sure that the local
distribution conditions (nature of the gas and
gas pressure) and the adjustment of the
appliance are compatible.
Make sure that there is air circulation around the
The information about the gas supply is on the
rating plate.
This appliance is not connected to a device,
which evacuates the products of combustion.
Make sure to connect the appliance according
to current installation regulations. Pay attention
to requirements regarding adequate ventilation.
WARNING! Risk of injury and burns.
Risk of electrical shock.
This appliance is for household use only.
Do not change the specification of this
Make sure that the ventilation openings are not


Table of Contents

This manual is also suitable for: