Replacing The Lamp; Troubleshooting - Zanussi ZCG64396XA User Manual

Table of Contents

Advertisement

Make sure the slot in the hinge A rests
on the edge of the hinge support B
before releasing the oven door.
A
Make sure the levers are in their
original position before closing the
door.

TROUBLESHOOTING

WARNING! Refer to Safety chapters.
18
B

REPLACING THE LAMP

WARNING! Risk of electric shock.
The lamp can be hot.
1. Turn off the oven.
Wait until the oven is cooled down.
2. Disconnect the oven from the mains.
3. Put a cloth on the bottom of the cavity.
The back lamp
1. Turn the lamp glass cover to remove it.
2. Clean the glass cover.
3. Replace the lamp with a suitable 300 °C heat-
resistant lamp.
4. Install the glass cover.

Advertisement

Table of Contents
loading

Table of Contents