If the mains power supply cable is damaged, it must be
replaced by the manufacturer, its Authorised Service Centre or
similarly qualified persons to avoid an electrical hazard.
To remove the shelf supports first pull the front of the shelf
support and then the rear end away from the side walls. Install
the shelf supports in the opposite sequence.
The means for disconnection must be incorporated in the fixed
wiring in accordance with the wiring rules.
WARNING: Use only hob guards designed by the manufacturer
of the cooking appliance or indicated by the manufacturer of
the appliance in the instructions for use as suitable or hob
guards incorporated in the appliance. The use of inappropriate
guards can cause accidents.
WARNING! Only a qualified person
must install this appliance.
Remove all the packaging.
Do not install or use a damaged appliance.
Follow the installation instructions supplied with
Always take care when moving the appliance as
it is heavy. Always use safety gloves and
Do not pull the appliance by the handle.
The kitchen cabinet and the recess must have
Keep the minimum distance from other
appliances and units.
Install the appliance in a safe and suitable place
that meets installation requirements.
Parts of the appliance carry current. Close the
appliance with furniture to prevent touching the
The sides of the appliance must stay adjacent to
appliances or units with the same height.
Do not install the appliance adjacent to a door
or under a window. This prevents hot cookware
to fall from the appliance when the door or the
window is opened.
Make sure to install a stabilizing means in order
to prevent tipping of the appliance. Refer to
WARNING! Risk of fire and electric
All electrical connections should be made by a
The appliance must be earthed.
Make sure that the parameters on the rating
plate are compatible with the electrical ratings
of the mains power supply.
Always use a correctly installed shockproof
Do not use multi-plug adapters and extension
Do not let mains cables touch or come near the
appliance door, especially when the door is hot.
The shock protection of live and insulated parts
must be fastened in such a way that it cannot be
removed without tools.
Connect the mains plug to the mains socket
only at the end of the installation. Make sure that
there is access to the mains plug after the
If the mains socket is loose, do not connect the
Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
Use only correct isolation devices: line
protecting cut-outs, fuses (screw type fuses
removed from the holder), earth leakage trips
The electrical installation must have an isolation
device which lets you disconnect the appliance