Larius Pegaso Operating And Maintenance Instructions Manual page 27

Problem
• Speed of application too slow
• Blocked compressor
PEGASO
Cause
• Material too thick;
• Nozzle too small;
• Flow control set too low;
• Plugged or dirty gun;
• Kinked hose;
• Overload;
• Magneto-thermal switch tripped.
25
Solution
• Thin material;
• Change nozzles to a larger size. See
Operation Manual, Recommended
Nozzle Selection Chart;
• Increase flow control setting;
• Relieve Pressure. Clean gun;
• Disentangle the hoses.
• Remove the rear casing, press button
(A) indicated in the photo to reset the
compressor.
A