Table of Contents
Advertisement
CLEANING THE MATERIAL
PASSAGE HOSE
☞
PLEASE NOTE
:
Suggested before storing the sprayer or when
changing the material to be sprayed.
1)
Disconnect the material feed hose and the air feed
hose from the gun;
2)
Disconnect the flexible material passage hose from
the sprayer;
3)
Insert the sponge sphere into the material hose;
4)
Reconnect the hose to the sprayer;
5)
Close the re-circulation valve;
6)
Pour clean water in the tank and position the end of
the hose in a bucket;
7)
Start the sprayer and turn the pump on, let the wa-
ter circulate until the sphere comes out of the hose;
8)
Retrieve the sponge sphere and wash it with clean
water, then return it to the designated toolbox.
PEGASO
6
17
1
2
3
4
7
Advertisement
Table of Contents
