EMS FCZ-170-111 Programming Manual page 7

Turn the rotary control until the screen displays:
Press the rotary control and the screen will display:
Press the rotary control and the screen will display:
Followed by:
Note: If unsuccessful when operation is carried out next to the Radio Hub, re-try steps 16-19
with the device installed in its correct installed location.
Once complete, press the BACK button until the screen displays:
©2018 EMS Ltd. All rights reserved. Page 7 of 24
Assign Device
Assign ALL
Dev 000 of 001
Done 001 of 001
DEV16 AL00 FT00
TSD115 Iss2 17/09/2018 AJM