Vertiv Liebert IntelliSlot Unity Card Installer And User Manual page 48

Table 5.2 LIFE Status Settings (continued)
STATUS
System Serial Number
Site Equipment Tag Number
Site Identifier
Answer Incoming Call
Next Call Date and Time
Call Interval Days
Call Interval Hours
Call Interval Minutes
Call Trials Number
Table 5.3 LIFE UPS-state SMS Messaging Configuration
SETTINGS
Primary Mains Restored SMS
Primary Mains Restored SMS Value
Primary Mains Failure SMS
Primary Mains Failure SMS Value
Bypass Mains Fail SMS
Bypass Mains Failure SMS Value
Load On Bypass SMS
Load On Bypass SMS Delay
44
DESCRIPTION
System serial number, obtained from the unit automatically
Site equipment tag number
Site identifier, entered by the Service Technician
Enable answering of LIFE Watch Station incoming calls
Date and Time of next call to make to the LIFE Watch Station server
Days between routine calls to LIFE Watch Station
Number of hours between LIFE Watch Station routine calls
Number of minutes between routine LIFE Watch Station calls. This value is used in conjunction
with val_life_callInterval_hours.
The number of attempts to retry a call after it fails before rescheduling the call.
DESCRIPTION
Send SMS when Primary Mains are restored
Value sent via SMS when Primary Mains are restored
Send SMS when Primary Mains fail
Value sent via SMS when Primary Mains fail
Send SMS when Bypass Mains fail
Value sent via SMS when Bypass Mains fail
LIFE Load on Bypass SMS Enable
The amount of time to delay sending an SMS after a Load is on Bypass if the condition
still exists.
Vertiv™ | Liebert® IntelliSlot Unity Card Installer/User Guide