Editing The Unity Card Configuration; Communications Tab Menu Folders; Active Events Folder; Downloads Folder - Vertiv Liebert IntelliSlot Unity Card Installer And User Manual

6 EDITING THE UNITY CARD CONFIGURATION
The Web UI can be used to configure the settings for the Unity card and for the monitored equipment.
The following steps apply to making changes to all configuration settings.
To edit the configuration:
1. Open a Web browser and enter the card's IP address.
2. Click the Communications tab.
3. In the tab menu, select the folder that contains the configuration setting to change.
4. Click Edit, and enter a user name and password if necessary.
5. Change the settings.
6. Click Save to apply the changes or Cancel to discard them.

6.1 Communications Tab Menu Folders

The Communications tab contains information about the overall event status of the equipment and
communication interface. It presents logs of third-party information, communication settings, third-party
protocol settings and system status information. The Communications folders are:
•

Active Events Folder

•

Downloads Folder

• Configuration Folder
• Protocols Folder
• Status Folder
• Support Folder
6.2 Active Events Folder
The Active Events folder contains no configurable settings. The folder displays events that affect the
Unity card.
6.3 Downloads Folder
The Downloads folder contains no configurable settings. The folder displays links to download logs of
third-party protocols that are enabled on the Unity card. The logs help in configuring and
troubleshooting communication between the Network Management or Building Management Systems
being used to monitor the managed device.
6 Editing the Unity Card Configuration
below
below
on the next page
on page 53
on page 59
on page 60
29