4 ENABLE CLOUD CLIENT FOR LIEBERT® MINI-MATE™
The Cloud Client is exclusively for the Mini-Mate Thermal Management System. The configuration menu
for the Cloud Client is only displayed when the detected managed device is a Mini-Mate unit. For all other
devices the Cloud Client configuration menu will NOT be displayed.
The Cloud Client updates a Cloud Server and make Mini-Mate status information available to a mobile
app, providing remote-device monitoring for the Mini-Mate unit.
To configure the Cloud Client, start with
below..
4.1 Typical Configuration for Cloud-client Support (Prerequisites)
Configuring the Cloud Client on an un-initialized Unity card requires the following:
•
The Unity card must have a network address assigned and have access to the Cloud Service
URL. The Cloud Service URL is typically https://icomcms.com.
•
DNS must be configured and working appropriately because it is used to access the Cloud
Service.
•
The Unity card must have a System Name that is unique to the Organization. The Unity card
"System Name" maps to the "Manager Name" in the Cloud Service.
•
The managed device must be a Mini-Mate Thermal Management System. Otherwise, the Cloud
Client folder is not available in the Unity Web UI menu.
•
The following Cloud Client information must have been factory-configured or be configured by
the customer using factory-supplied information:
•
Email Address – the customer email address associated with the Cloud Service
Organization specific to the customer.
•
Registration Key – factory supplied
•
Cloud Service URL – typically https://icomcms.com
•
The Cloud Client must be enabled.
With these items in place or staged, proceed to
to Allow Mobile-app Users Access
18
Typical Configuration for Cloud-client Support (Prerequisites)
Registering with the Cloud Service Administration Portal
on the facing page.
Vertiv™ | Liebert® IntelliSlot Unity Card Installer/User Guide
Need help?
Do you have a question about the Liebert IntelliSlot Unity Card and is the answer not in the manual?
Questions and answers