Vertiv Liebert IntelliSlot Unity Card Installer And User Manual page 20

Figure 3.1 SNMP Engine ID generated using text-format scheme
NOTE: If the format type or text for the Engine ID are incomplete or invalid, the Engine ID is generated
based on the MAC Address.
4. Restart the card to activate the changes:
a. On the Communications tab, click Support.
b. Click Enable.
c. Click Restart.
Configure SNMPv3 User Settings
1. On the Communications tab, select Protocols >
SNMP > SNMPv3Users Setting 20) > SNMPv3 Users Setting (1).
NOTE: The settings must be made for each user who will receive notifications.
2. Click Edit, and enter a user name and password if necessary.
3. Enter the information and set the permissions appropriate to the user.
For descriptions of the settings and options, see
4. Click Save to confirm the changes or Cancel to discard them.
5. Repeat steps
6. Restart the card to activate the changes:
a. On the Communications tab, click Support.
b. Click Enable.
c. Click Restart.
Configure SNMPv1 Trap Settings
1. On the Communications tab, select Protocols > SNMP > SNMPv1 Trap (20).
NOTE: The settings must be made for each user who will receive notifications.
2. Click Edit, and enter a user name and password if necessary.
3. Enter the information and set the permissions appropriate to the user.
For descriptions of the settings, see
16
1 through 4 for additional users.
SNMPv1 Trap Folder
SNMPv3 User Folder on page 57.
on page 58.
Vertiv™ | Liebert® IntelliSlot Unity Card Installer/User Guide