Registering With The Cloud Service Administration Portal To Allow Mobile-App Users Access - Vertiv Liebert IntelliSlot Unity Card Installer And User Manual

4.2 Registering with the Cloud Service Administration Portal
to Allow Mobile-app Users Access
Thermal-management units must be registered to provide data to the cloud so that mobile-app users will
receive the notifications from the cooling unit.
Units are registered based on domain portion of the organization's e-mail address. The domain is the part
after the "@" symbol and is typically the name of the organization, for example: @company.com.
NOTE: Before attempting registration with the Mobile Cloud Service, the Unity card in the unit must be
assigned network credentials on your corporate network to access the Cloud Service URL
(https://icomcms.com).
NOTE: When registering the cooling unit, be sure to use an e-mail address with the correct domain of
the organization. If you register using an e-mail address with an incorrect domain, un-register and
contact the administrator for the correct address.
NOTE: The mobile app is available for download from the Apple Store or Google Play Store depending
on your mobile device. Search for "iCOM CMS."
To register with the administration portal:
1. Use a CAT5 Ethernet cable to connect a computer/laptop to an Ethernet port on the Unity
card.
2. On the connected computer, open a Web browser and enter the card's default address:
169.254.24.7 in the address bar.
The Unity web user interface opens.
3. Configure the System Name before attempting to register the Mini-Mate unit:
• On the Unity web UI, click the Communications tab.
• In the Communications pane on the left-hand side, select Configuration > System.
• Click Edit, and enter the default Username and Password, which is Liebert (case-
sensitive) for both.
• Enter a descriptive System Name for the Mini-Mate unit. This will identify the unit for
management in the cloud client administration portal.
• Enter the remaining system settings if needed, and click Save.
4. Restart the card for the changes to take effect:
• Communications pane on the left-hand side, select Support.
• In the Commands section, click Enable, and enter the default Username and Password,
which is Liebert (case-sensitive) for both.
• Click Restart Card.
5. Obtain an e-mail address with valid domain from the Unity administrator who manages mobile-
app access for the organization.
6. On the Unity web UI, click the Communications tab, see
7. In the Communications pane on the left-hand side, select Configuration > Cloud Client.
8. Click Edit, and enter the default Username and Password, which is Liebert (case-sensitive) for
both.
4 Enable Cloud Client for Liebert® Mini-Mate™
Cloud Client Folder on page 52.
19